1930 Model A Hot Rod Rat Rod Air Bags An Reserve Pro Build Upgraded Suspension!! on 2040-cars

Auto blog

Ford F-Series Super Duty prototype reduced to smoldering mess of aluminum and steel [UPDATE]

The most important bit of information you need to know after looking through our high-res gallery of images depicting a prototype 2016 Ford F-Series Super Duty pickup truck burning to the ground is that nobody was hurt. There were two engineers inside the vehicle when it caught fire, and both exited to safety.
That's the good news. The bad news is that the truck, which appears to have been testing in Death Valley, appears to be a total loss, minus, of course, whatever information Ford can glean from the conflagration - particularly tracing it back to its root cause. Besides that, we're also expecting the body of the next Super Duty to be hewn from aluminum, as is the case with its smaller brother, the brand-new F-150. Note the little aluminum droppings littering the roadway as apparent proof of that.
Our spy photographers report that it took just 21 minutes for the F-Series Super Duty to burn completely to the ground. The fire appears to have started in the driver-side front wheel well, spreading to engulf the entire front end in three minutes. We can't confirm the source of the blaze, but we're curious if the car's black vinyl cladding, meant to obscure the secrets within, contributed to the fire.

Massive Airbag Recall Affects Seven Automakers

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a role in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time. BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall. Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands In most cases, only models in certain high-humidity regions were affected because the NHTSA found that moisture played a roll in determining if there would be a problem. Ford is recalling an estimated 58,669 cars that include the 2005-2006 model years of the Ford GT for the driver and passenger inflators, the 2007-2007 model years of the Mustang for the driver side and 2004 Ranger for the passenger side. It covers vehicles originally sold or currently registered in, wait for it... Florida, Puerto Rico, Hawaii and the US Virgin Islands. Honda is issuing three separate recalls regarding the problem. First, the company is recalling the 2002-2003 model years Civic, CR-V and Odyssey and the 2003 model year of the Accord, Element, Pilot and Acura MDX to replace the passenger's side inflator. This covers all models nationwide. Second, Honda is repairing the passenger's side airbag inflator in the 2003-2005 Accord, Civic, CR-V, Element, Pilot, the 2003-2004 model year versions of the Odyssey, the 2003-2005 model year Acura MDX and 2005 Acura RL. However, only for vehicles located in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico and the US Virgin Islands. Owners will be notified in July. Finally, Honda is separately replacing some models' driver's side inflators.

Ford reveals concept trucks that ultimately became Atlas

The Ford Atlas Concept was one of the quiet success stories of the 2013 Detroit Auto Show, and now Ford has given us a quick glimpse as to how that creation came to be. Designers actually combined two early sketches to build the Atlas. One, called the Bullet Train, is a futuristic, aerodynamic creation, while the other, aptly named the Locomotive, features the squared off proportions we're familiar with.
Once designers settled on the truck's proportions, they began nailing down exactly which attributes they wanted the final design to have. The Concept's notched windshield originated as a forked glass roof that seamlessly transitioned into the windscreen.
Likewise, designers wanted to fit the truck's tailgate with a storage compartment for tools and a first aid kit, but settled on the dual-purpose step/cargo cradle. Interestingly enough, the concept's active aero shutter wheels actually originated in some of the earliest sketches. Check out the photos and slides here for a closer look.