1929 Ford Model A Special Coupe Showroom Condition on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford readying Ranger-based Everest SUV?

Way back in August, we showed you a Ford concept for the Australian market called the Everest. Now, we can show you that work on the new Ranger-based SUV is well under way.
At this stage, it's still quite clearly a mule (note the misalignment of the front and rear doors), wearing the Ranger's front end and the rump of Ford's overseas Territory crossover. The wheelbase is shorter than a Ranger, according to our spy photographers, which strikes us as somewhat odd for a more passenger-oriented vehicle. Disc brakes should be fitted at all four corners, while the new SUV, which will almost certainly wear the Everest name, should sport a new rear suspension.
In terms of looks, we're expecting the Everest Concept to inform the appearance of the production model. Naturally, there will also be some interior tweaks, particularly around the dashboard, which is covered in these photos.

Black Zombie electric Mustang launches Blood Shed Motors [w/videos]

As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant. Lightning repeatedly vanquished the darkness like the angriest of strobe lights and thunder shook the building, punctuating the clatter of a heavy Texas rain on the metal roof as the clock ticked away the initial seconds of a rare full moon Friday the 13th. It was then that the Black Zombie came to life for the first time. Beneath the hood of this rust-free 1968 Mustang fastback, a 289-cubic-inch V8 no longer turns gasoline into heat, noise and pollution. As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant, and now boasts twinned Warp 11 DC motors and a pair of fresh Zilla controllers that will serve as the basic blueprint for future vehicles. Dubbed the Zombie 222 drivetrain, the setup will be limited to 750 horsepower in customer's cars to keep the maintenance experience low, and eventually will draw power from a 40-kWh battery pack. In this first example, though, the output is bit more extreme. For one day, at least, they have the 1,500-kW-capable pack that powers the record-setting Swamp Rat 37 racer belonging to Don Garlits and a brief window of opportunity to try it out on a track. Blood Shed Motors is the result of a collaboration between NEDRA co-founder John "Plasma Boy" Wayland, the man who helped bring electric vehicle drag racing to the attention of the world with his unassuming White Zombie Datsun 1200 conversion and Austin, TX business man Mitch Medford, who've put together a small team of experts in their chosen fields. The plan is to build a limited number of muscle car conversions on pristine early Mustang, Camaro, and Barracuda platforms. The plan is to build a limited number of high-quality muscle car conversions on pristine (No restored rust buckets!) early Mustang, Camaro, and Barracuda platforms. Each can be customized according to buyer's wishes and blessed with its own serial number. The price tags will be in the eye-watering $200,000-and-up neighborhood, reflective of the cost and rarity of these cars and the custom nature of the alterations. Of course, you can't just multiply horsepower and add the monster torque that these electric motors put out and expect an antique chassis to hold up.