1963 1/2 Ford Galaxie 500xl on 2040-cars

Auto blog

Ford Escort returns, just not for US

Ford is set to give the burgeoning Chinese market its very own C-segment model, while also reviving one of the brand's more notable nameplates. The new Escort, which will make its world debut at the 2014 Beijing Motor Show will be built in the People's Republic at the Changan Ford joint venture facility.
The Escort's exterior is best thought of as a mix of the finer points from the US market Focus and Fusion, with the Aston Martin-ish grille and narrow, wraparound taillights presenting a clean look at either end of the car. It's all fairly true to the concept car from last year's Shanghai Motor Show. That said, this exterior job is almost too clean. There doesn't seem to be a lot of character or substance beyond the typical Ford looks.
There's a similar issue in the cabin - it all looks pretty nice, but the design is rather plain, particularly when viewed alongside the display-filled cabin of a US-spec car. Still, there looks to be a fair amount of space in both the front and back seats, and the trunk isn't exactly tiny, either.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

2017 Ford GT spied in the raw

The Ford GT supercar is finally going outside to play, and it has been captured for the first time prowling the streets near Ford's compound in Dearborn, MI. Due in late 2016, the GT has been one of Ford's most closely guarded projects and was developed under a veil of secrecy. The prototype revealed at the Detroit Auto Show stunned enthusiasts, and these shots illustrate that it's making the leap to production reality. As our spy shooter wryly notes, the mule captured in these photographs looks like a Mad Max prop. It's colorless, is missing key body parts – note the ringless taillights and lack of a rear bumper or diffuser. It also looks to be even lower to the ground than the concept from the Detroit show. It appears to have different mirrors and windshield wipers. The lack of some body panels also calls out the exhaust pipes, which look like tail guns in these shots. Otherwise, this test car looks just like the auto show star, and sans paint it manages to appear even more sinister. Though these spy shots indicate the GT is on track for production, Ford has been pretty up front about what the car will be when it arrives in showrooms. We know it will have a twin-turbo EcoBoost V6 paired with a seven-speed dual-clutch gearbox. It will make extensive use of carbon fiber and feature a driver-oriented, contemporary-styled interior. Canadian company Multimatic will build the GT. The Le Mans-inspired supercar is the standard-bearer for Ford's renewed performance push. The automaker plans to roll out at least 12 sporting cars by 2020 as it looks to lure new buyers to its fold. Ford also using developments from these high-end cars to improve its lineup, and will it spread aerodynamics and materials technologies across its portfolio. "It's another proof point about how serious we are in developing innovation through performance," Ford product chief Raj Nair has said. Related Video: Featured Gallery 2017 Ford GT Spy Photos View 25 Photos Related Gallery Ford GT Concept: Detroit 2015 View 45 Photos Image Credit: Chris Doane Automotive Motorsports Ford Coupe Performance Supercars