1962 Ford Galaxie on 2040-cars

Auto blog

2017 Ford F-150 Raptor desert testing heats up

In case there was any doubt, Ford is taking the development of the second-generation SVT Raptor very, very seriously. The Blue Oval recently completed over 1,000 miles of testing in the boiling heat of the American southwest. Apparently, that mileage was accrued over a 66-mile route designed to mimic the torturous terrain encountered by racers in the Baja 1,000 off-road race. The prototypes, which were built from a mix of existing and next-gen Raptor components, were tested with "fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches." Ford claims the new truck managed to run the circuit 25-percent faster than the current F-150 SVT Raptor, averaging 50 miles per hour while going as fast as 100 mph in stretches. That said, Dearborn didn't release any dedicated times, so it's unclear just how quickly the 66-mile stage was completed. We do know that durability was a big part of the testing. Ford claims each lap was completed by what sounds like a pretty significant jump, with the trucks ascending a steep ramp onto a two-foot plateau and then completing a step-down to level ground. We have to take Ford at its word here, though. "Steep" can mean any number of things, and we've no idea just how fast the trucks were hitting the ramp or how much air they got. Hopefully, the jumps were aggressive enough to prevent future frame issues. Still, Ford boasting about how rough the Raptor's testing is can be taken as a positive sign for fans of the next-generation of SVT's rugged pickup. NEW F-150 RAPTOR WRAPS UP INITIAL DESERT DURABILITY TESTING DEARBORN, Mich., July 7, 2015 – The 2017 F-150 Raptor – Ford's toughest, smartest, most capable off-road truck ever – recently completed more than 1,000 miles of testing in the southwestern United States. Over 1,028 miles of desert trail designed to parallel the Baja race course in Mexico, the 66-mile route featured a wide range of surfaces including fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches. The truck topped speeds of 100 mph in places, slowing to 10 mph in others, for an average speed of approximately 50 mph. The 2017 Raptor is 25 percent faster than the current truck based on lap times. At the end of each lap, the new Raptor completed a tabletop jump consisting of a steep ramp up to a two-foot plateau, then a step-off back to level ground.

70% of pickups could use aluminum by 2025

In the next decade, the auto industry will see an explosion in its use of aluminum to cut weight and increase fuel economy, according to a study from market analysts Ducker Worldwide cited by The Detroit News. We are already seeing the lightweight metal show up extensively in luxury models from Europe, but with the impending launch of aluminum-intensive 2015 Ford F-150 (pictured above), North America is using it even more, as well. The report predicts 70 percent of US pickups to have aluminum bodies by 2025.
It won't just be pickups that see the benefit, though. The average amount of aluminum in US vehicles is forecasted by the study to grow from an average of 350 pounds in 2013 to about 550 pounds by 2025. The most common parts to use it will be hoods, doors and - to some extent - roofs, as well.
The massive increase in pickups' aluminum content hardly seems surprising. The F-150 is predicted to use so much that it might cause a short-term shortage, according to one earlier report. At the same time General Motors is heavily rumored to be negotiating with suppliers for the next generation Chevrolet Silverado and GMC Sierra. Ram is the last holdout of the Big Three, but the study predicts that not to last.

Ford secures Microsoft for software updates

Ford is dropping Microsoft later this year as its infotainment partner when the Blue Oval switches to the BlackBerry QNX operating system for Sync 3 (pictured above). However, the two companies aren't severing ties completely, because the Redmond, WA, outfit is taking responsibility for Sync 3's wireless updates. Don Butler, Ford Director of Connected Vehicles and Services, announced the deal during a speech, according to Automotive News. "We've obviously had a good, long relationship with Microsoft," he said. "Microsoft understands the automotive environment and the kinds of experiences that we'd like to enable." The ability for Sync 3 to accept Wifi updates was announced as a major feature the new infotainment system, but this was the first mention of how that has been handled. Ford will host the files on Microsoft's Azure Cloud servers, according to Automotive News. Owners will need to give permission to check for new software, and they'll be notified after an improvement's installation. Dealers will install Wifi transmitters to keep vehicles on the lot up to date, as well. Sync 3 is set to replace the much-maligned MyFord Touch later in 2015 on some 2016 model year vehicles, and by next year it should be available throughout the Ford and Lincoln lineups. In addition to the wireless updates, the new system also promises a simplified interface, better voice recognition and faster response times. Ford Motor Company is preparing for vehicle ownership and user experiences of the future with the creation of a global cloud based Ford Service Delivery Network enabling new ways for consumers to interact with cars. Teaming up with Microsoft, Ford will expand connected services for customers around the world using the globally scalable and reliable Azure Cloud infrastructure. Ford and Lincoln owners will benefit from the convenience of new connectivity services keeping them better informed and in control of their vehicle at all times with the expanded availability of features like scheduled remote start, vehicle finder, and vehicle status (fuel or charge level, tire pressure). Building the Ford Service Delivery Network (SDN) on the Microsoft Azure platform enables a common platform for Ford to bring new features and services to market faster, quickly scale up for global implementation, and remain flexible for the future. Starting later this year, the Service Delivery Network will first enable over-the-air software updates for SYNC 3.