2014 Ford Fusion Se on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Hear the 2015 Mustang GT V8 roar for the first time

Our combined knowledge of the 2015 Ford Mustang continues to deepen, as spy shooters have begun to compile video and audio of the upcoming sixth-generation car.
Case in point is this latest series of video clips, which not only gives us a great vantage point of the Mustang in motion, but also allows us to hear the Ford V8 engine and exhaust. After perusing the aural delights of this short video, which, admittedly, doesn't catch the Mustang GT at full song, we can at least say that the throaty exhaust isn't disappointing.
Chances are good that the 2015 Mustang GT will debut with some version of the current (and excellent) Coyote 5.0-liter V8 engine, though we're unclear as to whether or not the motor has been massaged for its next-gen debut, or what may have been done to exhaust plumbing. At this point, we're just happy to hear the pony run. Scroll below to hear for yourself.

2013-2017 Ford Explorer recalled over rear suspension issue, again

Ford is recalling about 375,000 Explorer SUV models built between 2013 and 2017 in North America to fix a potential defect in the rear suspension. In "North America states and provinces where corrosion is common," which we take to mean areas that experience harsh winters and heavily salted roads, "a fracture of the outboard section of the rear suspension toe link" is possible on affected vehicles. Ford says 350,000 of these models were sold in the United States and another 25,200 in Canada. This isn't the first time Explorers of this generation have been recalled for fractured toe links. Back in the summer of 2017, 1.2 million Explorer models were recalled over toe links that could fracture if subjected to "frequent full rear suspension articulation (jounce and rebound)." A little over a year earlier, 75,000 Explorers were recalled over, you guessed it, rear toe links that may not have been welded properly. It's not just Explorers that Ford has recalled over rear toe links. Earlier this year, the automaker issued a recall that covered nearly 230,000 Ford Flex, Taurus and Lincoln MKT models. All of these recalled vehicles ride on similar unibody underpinnings that Ford calls the D4 platform. We can't say whether these other D4-based vehicles will get another recall as the Explorer has. Ford says it is aware of as many as 13 crashes and six injuries attributable to the toe links covered under this most recent Explorer recall. Owners will need to visit their preferred dealership, which will "complete a torque inspection of the cross-axis ball joint and replace it as necessary," according to Ford. Related Video: