2012 Ford Fusion Sel on 2040-cars

Auto blog

Ford confirms 1.5-liter EcoBoost four-cylinder engine for 2014 Fusion

Earlier this week, reports were swirling 'round the internet about the 2014 Ford Fusion getting a new 1.5-liter three-cylinder EcoBoost engine. That was... half correct. Ford today confirmed that the 2014 Fusion is, in fact, getting a new 1.5-liter EcoBoost mill, but it has four cylinders, not three.
The new 1.5-liter engine will be the fifth EcoBoost powerplant from Ford Motor Company. Initially to be built at the automaker's Craiova, Romania plant, it will also be offered in the Fusion's twin, the Mondeo, in other markets. This engine will debut at the Shanghai Motor Show next month, and the 1.5-liter is of particular importance in the Chinese market - there is significant tax relief in the People's Republic for vehicles powered by engines with a capacity of 1.5 liters or less.
At a media briefing Thursday, Ford declined to divulge exact power or fuel economy numbers, though Joe Bakaj, vice president of powertrain engineering, told Autoblog that power output should be similar to that of the current 1.6-liter inline-four, and that overall efficiency will be "better than the 1.6." Our earlier report stated that the 1.5-liter four will produce 177 horsepower and 177 pound-feet of torque - losses of 1 hp and 7 lb-ft versus the 1.6-liter engine. Ford states that the 1.5-liter four will feature many of the same technologies used on the company's 1.0-liter EcoBoost inline-three, including an integrated exhaust manifold that recaptures much of the engine's heat.

Ford is recalling more Takata airbag-equipped Ford and Lincoln models

The Basics: Takata, the beleaguered airbag supplier at the root of the largest recall in automotive history, has informed Ford of a problem with the airbags in just over 30,000 Ford and Lincoln models. The problem is not related to the non-desiccated ammonium nitrate airbag inflators that plague the other airbags ( including many Fords), meaning there isn't a risk of shrapnel flying out from the units in this particular recall. The Problem: In the event of an accident, the front airbags may only partially inflate, and the airbag may become detached from the module because of misaligned parts. The problem affects 2016 and 2017 Ford Edge and Lincoln MKX models built at the Oakville Assembly Plant. The issue also affects 2017 Lincoln Continentals that were built at the Flat Rock Assembly Plant. Injuries/Deaths: In a release, Ford stated that it is not aware of any accidents, injuries, or deaths related to the airbag issue. The Fix: Dealers will replace the driver-side front airbag module at no cost. If You Own One: Sit tight and wait for Ford to notify owners. When that happens, take your car to the dealer for a replacement. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: FordImage Credit: AOL/Drew Phillips Recalls Ford Lincoln Maintenance Safety lincoln mkx

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video: