2011 Ford Fusion Sel on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Hot-selling Ford Expedition, Lincoln Navigator get production boost

Ford is investing an additional $25 million in its Kentucky Truck Plant in Louisville to increase by 25 percent production of the hot-selling and all-new Lincoln Navigator and Ford Expedition SUVs. The investment adds to $900 million in previously announced spending at the plant, which also builds F-Series Super-Duty pickups and employs 8,400 workers. Assembly-line workers are putting in overtime and working voluntary weekend shifts to keep up with demand. The new investment will cover upgrades to the assembly line but does not involve further hiring, Ford spokeswoman Kelli Felker says. The popularity of the Ford Expedition and Lincoln Navigator is a bright spot as Ford stock has been battered by Wall Street amid concerns concerns about the automaker's future vision and slowness to detect trends. Ford says the investment is an example of its bid to improve "operational fitness," one of CEO Jim Hackett's common refrains. Ford says Navigator retail sales more than doubled in January, and Navigators are spending an average of just seven days on Lincoln dealership lots as customers trade in vehicles including Land Rovers and Mercedes-Benz. Nearly 85 percent of buyers are opting for high-end Black Label and Reserve trim packages, contributing to an average transaction price increase of more than $21,000 in January compared to a year ago. The 2018 Navigator won the North American Truck of the Year award and also topped a Detroit News poll of public favorites at last month's Detroit Auto Show. Sales of the Expedition, meanwhile, were up almost 57 percent last month as the full-size SUVs also spent an average of just a week on dealer lots. Platinum trim models represented 29 percent of sales, pushing transaction price increases up $7,800. Ford gave the 2018 Expedition an all-aluminum body to save mass in its first significant redesign since 2007. The plant last year got nearly 400 new robots, mainly in the body shop, to help increase line speed, and Ford added a robot lab where employees can test software tweaks or troubleshoot issues away from the factory floor. The Louisville plant also benefits from extensive new data analytics, with seven big-screen monitors providing minute-by-minute updates showing progress against hourly targets or alerting workers to pending parts shortages. A huge spare-parts "vending machine" lets workers more quickly locate needed parts and keep inventory at necessary levels.

Former Ford CEO Alan Mulally lands on Google board

Former Ford CEO Alan Mulally often referred to the Blue Oval as a technology company when he led the automaker. Now he'll be offering guidance to a different kind of technology firm: Google.
Mulally was appointed to Google's board of directors July 9, and late Tuesday, it was announced that he will serve on the company's audit committee. The veteran executive led Ford from September 2006 until he retired in June, succeeded by Mark Fields.
While Mulally will act as a board member - rather than in a managerial role - his presence adds credibility to Google's recently announced plans to produce an autonomous car. The ambitious program calls for 100 prototypes to begin testing later this summer. Production of the car is rumored to be in collaboration with a Detroit area performance company, Roush.