Auto blog

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

MotorWeek remembers pre-EcoBoost Ford with the Thunderbird TurboCoupe

Sometimes it feels great to embrace nostalgia for a trip down memory lane, and MotorWeek indulges that occasional desire with its regular Retro Review series. This time, the long-lived show goes back to the '80s to check out two of the top performance vehicles in the Ford lineup at the time – the 1987 Thunderbird TurboCoupe and Mustang GT. Both models had just received thorough refreshes after several years on the market. Long before an EcoBoost badge ever met its models, Ford made early forays into experimenting with turbocharging on vehicles like the T-Bird TurboCoupe. Based on MotorWeek's assessment, the company was on the right track. The boosted 2.3-liter four-cylinder was apparently a bit coarse but offered 190 horsepower with little turbo lag, compared to 155 hp the year before. The Mustang GT is likely the more-fondly remembered of these performance Fords today and provides an interesting point of comparison against the TurboCoupe. MotorWeek found some faults with the 'Stang, though. While it was quick for the time with a sprint to 60 mph in 6.5 seconds, the 'car was described as "a nose-heavy beast" for its handling. And for a look at Ford's future in turbocharging – the GT will have an EcoBoost powerplant – check out our Related Video:

Ford paying $750 million just to close plant in Belgium

According to a report from Reuters, Ford is shelling out $750 million in a severance deal that will see the automaker close its facility in Genk, Belgium. The automaker reached this deal with the 4,000 hourly workers employed at the plant last week, which means the company will pay out an average of $187,500 per worker.
Ford is still negotiating with the 300 salaried workers at the factory, which currently produces the Mondeo sedan. All told, Ford expects to lose around $2 billion in Europe thanks in no small part to the region's ongoing economic downturn, and two more plants are scheduled to be shut down in Europe this year. The company will log its $750 million payout under "special items" for this quarter.
As you may recall, Ford took a similar path in the US back in 2009 when the domestic market took a spill. Back then, the company shelled out around $50,000 per employee with at least one year of experience, plus either $25,000 toward a new car or an extra cash payment of $20,000. It would seem the cost of closing plants in Belgium is a much harder pill to swallow than in the States...