Titanium 2.0l Remote Start Front Wheel Drive Alloy Wheels Back Up Camera Leather on 2040-cars

Auto blog

Hennessey completes first VelociRaptor SUV conversion [w/video]

Start with a Ford F-150 SVT Raptor as your base vehicle for modification, and chances are high that you'll end up with something pretty cool. Now, have those modifications done by professional lunatics Hennessey Performance, make the project turning the pickup into an ultra-long SUV, and the result stands a real chance of being a total kick in the ass. Let us present the Hennessey VelociRaptor then, in all of its awesomeness.
Hennessey has taken care in grafting a "Expedition style" rear cabin onto the Raptor, complete with an optional third row. The pictures we have show a cabin that's up to the fit and finish standards of the original Ford truck, too. The cab added over the bed also makes room for a massive load space out back, accessible via split out-folding doors and long enough for a person to lay down in (see video).
Mechanically, the truck-turned-SUV sticks with Ford's stock 6.2-liter V8, rated at 411 horsepower, or can be had with a supercharger and some 600 hp. Hennessey says the stock-motor VelociRaptor will run from 0-60 miles per hour in 7.5 seconds, while the hi-po version takes just 5.9 seconds. The SUV does take some of the off-road ability away from the Raptor, with the company saying it hasn't yet had the opportunity to test its capabilities. On-roading and "moderate off-road duties" are the current prescription.

UK's Loughborough University improving Ford's 1.0-litre EcoBoost engine

How much does it cost for college students to study zero emissions vehicles? At Loughborough University in the UK, a new Advanced Propulsion Centre (APC) is being built at a cost of a billion pounds ($1.7 billion US). The school has just announce that it will fund a number of grad student positions and is creating a new Chair in Advanced Propulsion Systems, which sounds like a fun job to us. We're weird like that. There will be a total of four professor-type positions in the new Center, including the chair, all focused on teaching students about low-carbon vehicle technologies, specifically electric and hybrid ones. The school is investing 1.5 million pounds ($2.5 million) for the new positions. There is a bigger picture as well, a 26-million pound ($44 million) Advanced Combustion Turbocharged Integrated Variable-valvetrain Engine (ACTIVE) project, which uses funds not only from the school but also from Ford and others. The point of ACTIVE is to study Ford's 1.0-liter EcoBoost engine and "improve further its efficiency and ensure it exceeds 2020 emission regulations." This is already a popular engine for the automaker, and it will need to stay at the bleeding edge of efficiency to remain as important in 2020 as it is today. Loughborough University has been working with automakers on advanced energy technologies for years, for example with Rolls-Royce and fuel cells in 2007 and the Lotus Hotfire engine in 2008. University invests GBP1.5M in advanced propulsion research to advance zero emissions vehicles challenge Loughborough University is investing GBP1.5M over five years in strategic research appointments, inspired by the global challenge to develop the new advanced propulsion technologies required for the move to zero emission vehicles. These appointments reinforce the University's world-class research in low-carbon vehicle technologies, adding new dimensions concerned with electric and hybrid drives. Four appointments will be made, including a Chair in Advanced Propulsion Systems, supported by a number of PhD studentships. The GBP1.5M investment is part of the University's commitment to the recently announced Advanced Propulsion Centre (APC) to support the development of new supply chains for low carbon vehicles. APC is an initiative established by the Automotive Council that will see GBP1 billion of investment from government and industry over the next 10 years.

2015 Ford Transit

As a segment, fullsize vans are stealth-fighter invisible on most consumers' radar. Visit a dealership for any of the four brands that offer them and you'll be lucky to find even one on display. These are commercial vehicles primarily, even more so than pickup trucks. Vans are the shuttles for plumbers, caterers, carpenters, concrete layers, masons, electricians, florists and flooring, and a huge part of this country's productivity is accomplished using them. At the moment, Ford is the 800-pound gorilla in that room - fully 41 percent of commercial vehicles wear a Blue Oval. So when Ford announced three years ago it would be ditching its commercial bread-and-butter E-Series, it meant the Transit that would be replacing the Econoline had huge, 53-year-old shoes to fill.
We were still a bit nostalgic about Econoline vans going away until going directly from the Transit first drive in Kansas City to an E-350 airport shuttle. Climb up through the Econoline's tiny double doors and bang your head on the opening, crouch all the way to your seat then enjoy a loud, rattle-prone, creaky, harsh ride on beam-hard seats while struggling to see out the low windows. This is an experience nearly every traveler has had. By comparison, the Transits we'd just spent two days with were every bit of the four decades better they needed to be. It cannot be understated just how much better the Transit is in every single way. The load floor is barely more than knee high. There's a huge side door, and hitting your head on a door opening is nearly impossible. Stand up all the way if you're under six-foot, six-inches - no more half-hunching down the aisle. There are windows actually designed to be looked out of. The ride is buttery smooth, no booming vibration from un-restrained metal panels and no squeaks. Conversations can be held at normal levels rather than yelling over the roar of an ancient V8. The seats are comfortable. The AC is cold. There are cupholders.
Enough anecdote-laying, what's in a Transit? We're talking about a very fullsized unibody van that's enjoyed a 49-year history in Ye Olde Europe. This latest iteration is part of the "One Ford" initiative, so it was designed as a global offering from the get-go, eschewing the body-on-frame construction the E-Series has used since 1975. Instead, the Transit integrates a rigid ladder frame into an overall frame construction made of high-strength cold-rolled and boron steel. The suspension is a simple but well-tuned Macpherson strut array up front with a rear solid axle and leaf springs.