Clean Car!!!! Needs Nothing!!!! No Reserve!!!! on 2040-cars

Auto blog

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford confirms 1.5-liter EcoBoost four-cylinder engine for 2014 Fusion

Earlier this week, reports were swirling 'round the internet about the 2014 Ford Fusion getting a new 1.5-liter three-cylinder EcoBoost engine. That was... half correct. Ford today confirmed that the 2014 Fusion is, in fact, getting a new 1.5-liter EcoBoost mill, but it has four cylinders, not three.
The new 1.5-liter engine will be the fifth EcoBoost powerplant from Ford Motor Company. Initially to be built at the automaker's Craiova, Romania plant, it will also be offered in the Fusion's twin, the Mondeo, in other markets. This engine will debut at the Shanghai Motor Show next month, and the 1.5-liter is of particular importance in the Chinese market - there is significant tax relief in the People's Republic for vehicles powered by engines with a capacity of 1.5 liters or less.
At a media briefing Thursday, Ford declined to divulge exact power or fuel economy numbers, though Joe Bakaj, vice president of powertrain engineering, told Autoblog that power output should be similar to that of the current 1.6-liter inline-four, and that overall efficiency will be "better than the 1.6." Our earlier report stated that the 1.5-liter four will produce 177 horsepower and 177 pound-feet of torque - losses of 1 hp and 7 lb-ft versus the 1.6-liter engine. Ford states that the 1.5-liter four will feature many of the same technologies used on the company's 1.0-liter EcoBoost inline-three, including an integrated exhaust manifold that recaptures much of the engine's heat.

Ford Fusion getting substantial refresh for 2017

It's only been a couple of years since Ford rolled out the current Fusion, but if these spy shots are anything to go by, it's already planning what appears to be a substantial update for the mid-size sedan.
According to our paparazzi on the ground, the new Fusion is being prepared for launch late in 2016 or early 2017. Although heavily camouflaged to keep it from prying eyes such as ours, it appears that the updated Fusion will tone down the Aston Martin-style grille, ditch the small corner window with revised front side glass and tweak the vehicle's overall shape. But there's more to the new Fusion than a styling adjustment, and our spy photographers have caught a glimpse inside and taken us along.
Apparently the new Fusion is to get a completely overhauled interior with soft-touch surfaces and matte wood trim to make it seem more upscale. There's an all-new rotary gear selector (like you'd find on a Jaguar, for example) hinting at the implementation of a new nine-speed automatic transmission. The prototype appears to be packing the Microsoft SYNC system, suggesting that the new Blackberry QNX system isn't ready quite yet - though that doesn't necessarily mean it won't be ready by the time the new Fusion is.