2014 Ford Focus Se on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

J Mays retiring from Ford design, succeeded by Moray Callum

Ford's highly influential head of design, J Mays, has announced that he'll be retiring from his position after 33 years in the industry, 16 of which were at the Dearborn, MI-based company. Upon departure, he'll be succeeded as group vice president of design by Moray Callum. If that last name sounds familiar, yes, he's the brother of Jaguar's Ian Callum.
It's difficult to explain just how big of a role Mays had on not just Ford's design over the years, but on the entire industry. Before heading to Dearborn, Mays worked for Audi, BMW and then Volkswagen, where he was involved in concept cars that paved the way for design icons like the first-generation Audi TT and the Volkswagen New Beetle. As for his Ford resume, it's extensive.
Mays joined the company in 1997 as design director for Ford, Lincoln, Mercury and Mazda, as well as the Premier Automotive Group (Volvo, Land Rover, Jaguar and Aston Martin). He was heavily involved in the Ford Fusion, Focus, Fiesta, Taurus, F-150 and Mustang, while also contributing to concept cars like the Atlas, Evos, 427, Forty-Nine, Shelby GR-1, Lincoln MKZ and the MKC.

Hennessey showcases F-250 VelociRaptor SUV

With automakers embracing smaller and smaller crossovers with each passing year, it'd be all too easy to forget about the Ford Excursion. Bigger than the Expedition (or just about anything else on or off the road), the Excursion was based on Ford's Super Duty truck chassis to put even the likes of the Chevy Suburban, Nissan Armada, and Toyota Sequoia to shame. It ceased production ten years ago now, but Hennessey is bringing it back – sort of. Feast your eyes on the Hennessey VelociRaptor SUV. The design calls for a very fullsize, truck-based sport-ute based on the Ford F-250. Only instead of a pickup bed, it's got four proper side doors and a covered cargo bay with a pair of barn doors at the back. Hennessey will fit it with three rows of seats to accommodate seven or eight passengers, and of course it'll offer a range of upgraded engines as well. What starts out with a 6.2-liter V8 producing 411 horsepower can be supercharged all the way up to 600 or even 650 horses. For those who don't want to spend their life's savings at the pump... well, this probably isn't the right choice of automobile, but Hennessey will offer an enhanced 6.7-liter PowerStroke diesel with 440 hp and 880 pound-feet of stump-pullin' muscle. Naturally there'll be other visual and mechanical upgrades on offer as well, but none of this will come cheap – or fast for that matter. Hennessey will take six months to put one together, and demand nearly $160,000 for the conversion.