2012 Ford Focus Se - Tx Salvage Title on 2040-cars

Auto blog

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.

NHTSA closes Ford F-Series Super Duty steering probe without recall

The National Highway Traffic Safety Administration's investigation into 2008 Ford F-250 and F-350 Super Duty pickups, which was originally opened last year, has now ended without a recall. NHTSA was looking into steering failures on some 336,000 trucks.
The issue rested with the steering gear - NHTSA received five complaints of failures - which was redesigned in 2005. According to the report on the matter, investigators "found evidence of broken sector shaft gear teeth and piston damage consistent with incidents of single event overload."
NHTSA investigators, however, "found no evidence of fatigue or material property defects in any of the fractures. Analysis of complaint rates by vehicle build month showed no patterns indicating potential manufacturing quality issues and no difference before and after Ford introduced design changes to the input shaft and sector shaft seals in July 2007 to address potential leak concerns," according to the report, obtained by The Detroit News.

Ford rolls out diesel Focus ST at Goodwood [w/poll]

If you're in the market for a hot hatch, there are some excellent choices at your disposal - especially if you live in Europe. But if you want a diesel, well, your choices become rather more limited. Volkswagen tends to that niche market with the Golf GTD (essentially an oil-burning version of the GTI available Stateside), but that's about the extent of it. The pleas of those looking for more diesel-burning hot hatch choices haven't fallen on deaf ears at Ford, with the Blue Oval not only rolling out a facelifted gas-powered Focus ST at the Goodwood Festival of Speed this weekend, but also a new diesel version as well.
The diesel Focus ST (which we hope and pray isn't marketed as the STD) packs a 2.0-liter turbodiesel four producing 182 horsepower and 295 pound-feet of torque to propel the oil-burning hot hatch to 62 in 8.1 seconds en route to a top speed of 135 miles per hour. With less power and only slightly more torque, that makes the diesel Focus ST considerably slower than the gasoline one, which packs 252 hp and 270 lb-ft, runs to 62 in 6.5 seconds and tops out at 154 mph, but (in a testament to how far particulate filters have come) the diesel model cuts carbon emissions by nearly a third compared to the petrol version and returns about 50-percent better fuel economy, which makes that much more of a difference in markets where diesel is already priced better than gasoline at the pump.
For buyers who wouldn't consider anything other than a diesel, it also represents 23-percent more power than the previous top-level diesel Focus. The VW Golf GTD, for reference, offers up 181 hp (just 1 horse less), 280 lb-ft (15 fewer torques) but is somehow estimated to reach 60 in a considerably fleeter 7.4 seconds.