Find or Sell Used Cars, Trucks, and SUVs in USA

2012 Ford Fiesta Se on 2040-cars

US $13,989.00
Year:2012 Mileage:15908 Color: Red
Location:

901 S Illinois St, Belleville, Illinois, United States

901 S Illinois St, Belleville, Illinois, United States
Advertising:
Fuel Type:Gasoline
Engine:1.6L I4 16V MPFI DOHC
Transmission:6-Speed Automatic with Auto-Shift
Condition: Used
VIN (Vehicle Identification Number): 3FADP4EJ2CM170471
Stock Num: 1-7407A
Make: Ford
Model: Fiesta SE
Year: 2012
Exterior Color: Red
Options:
  • 1st and 2nd row curtain head airbags
  • 4-wheel ABS Brakes
  • ABS and Driveline Traction Control
  • AM/FM/Satellite-prep Radio
  • Body-colored grille
  • Bucket front seats
  • Cargo area light
  • Center Console: Full with storage
  • Clock: In-dash
  • Coil front spring
  • Coil rear spring
  • Compass
  • Curb weight: 2,537 lbs.
  • Daytime running lights
  • Digital Audio Input
  • Driver knee airbags
  • Dual vanity mirrors
  • External temperature display
  • Fold forward seatback rear seats
  • Front and rear reading lights
  • Front Head Room: 39.1"
  • Front Independent Suspension
  • Front suspension stabilizer bar
  • Front Ventilated disc brakes
  • Fuel Capacity: 12.0 gal.
  • Fuel Consumption: City: 29 mpg
  • Fuel Consumption: Highway: 38 mpg
  • Fuel Type: Regular unleaded
  • In-Dash single CD player
  • Independent front suspension classification
  • Instrumentation: Low fuel level
  • Manual front air conditioning
  • Manufacturer's 0-60mph acceleration time (seconds): 8.4 s
  • Max cargo capacity: 26 cu.ft.
  • Metal-look dash trim
  • Metal-look door trim
  • MP3 player
  • Overall height: 58.0"
  • Overall Length: 160.1"
  • Overall Width: 67.8"
  • Passenger Airbag
  • Power remote driver mirror adjustment
  • Power remote passenger mirror adjustment
  • Power windows
  • Premium cloth seat upholstery
  • Privacy glass: Light
  • R
  • Radio Data System
  • Rear bench
  • Rear spoiler: Lip
  • Regular front stabilizer bar
  • Remote activated exterior entry lights
  • Remote power door locks
  • Semi-independent rear suspension
  • Side airbag
  • Spare Tire Mount Location: Inside under cargo
  • Speed Sensitive Audio Volume Control
  • Speed-proportional electric power steering
  • Stability control
  • Steel spare wheel rim
  • Strut front suspension
  • Surround Audio
  • Suspension class: Regular
  • Tachometer
  • Tilt and telescopic steering wheel
  • Tire Pressure Monitoring System
  • Torsion beam rear suspension
  • Total Number of Speakers: 4
  • Trip computer
  • Urethane shift knob trim
  • Urethane steering wheel trim
  • Variable intermittent front wipers
  • Vehicle Emissions: LEV II
  • Wheel Diameter: 15
  • Wheel Width: 6
  • Wheelbase: 98.0"
Drive Type: FWD
Number of Doors: 4 Doors
Mileage: 15908

You NEED to see this car! Real Winner! Want to stretch your purchasing power? Well take a look at this wonderful-looking 2012 Ford Fiesta. This is a fantastic one-owner Fiesta and it's ready for you to take home today. No sordid history on this one-owner creampuff. We have the largest selection of pre-owned vehicles in the St Louis metro area. Great selection, Great service - It's Auffenberg!

Auto Services in Illinois

Wheel-Go Camping Inc ★★★★★

Automobile Parts & Supplies, Recreational Vehicles & Campers, Truck Caps, Shells & Liners
Address: 13515 W 159th St, Morris
Phone: (708) 301-9110

Wellfit Parts International Corp ★★★★★

Automobile Body Repairing & Painting, Automobile Parts & Supplies, Automobile Parts, Supplies & Accessories-Wholesale & Manufacturers
Address: 607 Lambert Pointe Dr, Brooklyn
Phone: (314) 731-5550

Weber Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Inspection Stations & Services
Address: 214 Greenwood Rd Ste C, Highwood
Phone: (847) 676-2566

Top Value Auto Repair ★★★★★

Auto Repair & Service
Address: 4857 W Division St, Forest-Park
Phone: (773) 287-7280

Swedish Car Specialists ★★★★★

Auto Repair & Service, Automobile Performance, Racing & Sports Car Equipment, Automobile Racing & Sports Cars
Address: 916 Lunt Ave, Medinah
Phone: (847) 891-3133

Streit`s Auto Repair ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 411 N Grove Ave, Elgin
Phone: (847) 695-4433

Auto blog

This 1969 Ford F-100 has a Cadillac CTS-V engine lurking underhood

Fri, Jan 30 2015

Something always feels just a little taboo when someone builds a custom and then slots in a powertrain from a rival automaker. That's exactly the case with this modded 1969 Ford F-100 boasting a highly tuned LSA supercharged V8 like from the second-gen Cadillac CTS-V. However, with a claimed 800 horsepower on tap thanks in part to running an estimated 20 pounds of boost, it's easy to get over any bad feelings. Built by Tommy Pike Customs in South Carolina, the truck tries to keep the exterior looking somewhat stock. Although, the jade green and satin gold paint, Quaker State logo, lowered suspension and black wheels immediately suggest something is up. Once the F-100 starts up with its menacing growl, absolutely any doubts of this beast being unaltered are immediately gone. Not so obvious are some tweaks to actually help put all that power down, including disc brakes and independent suspension setups at the front and rear. The video gives some glimpses at a few of Pike's other creations, but the real star here is definitely his mean, green Ford.

Defying Trump, major automakers finalize California emissions deal

Tue, Aug 18 2020

WASHINGTON — The California Air Resources Board (CARB) and major automakers on Monday confirmed they had finalized binding agreements to cut vehicle emissions in the state, defying the Trump administration's push for weaker curbs on tailpipe pollution. The agreements with carmakers Ford Motor Co, Volkswagen AG, Honda Motor Co and BMW AG were first announced in July 2019 as voluntary measures prompting anger from U.S. President Donald Trump. A month later, the Justice Department opened an antitrust probe into the agreements. The government ended the investigation without action. The Trump administration in March finalized a rollback of U.S. vehicle emissions standards to require 1.5% annual increases in efficiency through 2026. That is far weaker than the 5% annual increases in the discarded rules adopted under President Barack Obama. The 50-page California agreements, which extend through 2026, are less onerous than the standards finalized by the Obama administration but tougher than the Trump administration standards. The automakers have also agreed to electric vehicle commitments. Volvo Cars, owned by China's Geely Holdings, said in March it planned to join the automakers agreeing to the California requirements. It has also finalized its agreement. The settlement agreements say California and automakers agreed to resolve "potential legal disputes concerning the authority of CARB" and other states that have adopted California's standards. In May, a group of 23 U.S. states led by California and some major cities, challenged the Trump vehicle emissions rule. Other major automakers like General Motors Co, Fiat Chrysler Automobiles NV and Toyota Motor Corp did not join the California agreement. Those companies also sided with the Trump administration in a separate lawsuit over whether the federal government can strip California of the right to set zero emission vehicle requirements. Ford said the "final agreement will reduce emissions in our vehicles at a more stringent rate, support and incentivize the production of electrified products, and create regulatory certainty." BMW said "by setting these long-term, predictable, and achievable standards, we have the regulatory certainty that is necessary for long-term planning that will not only reduce greenhouse gas emissions but ultimately benefit consumers as well." 

Now you can 3D print your favorite new Ford

Fri, Jun 12 2015

Ford is letting people build their own cars, offering digital files so people can print 3D versions of their favorite models. This is way cooler than any old Matchbox or Hot Wheels toy. Ford this week started offering printable files for the F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST. Folks can order the 3D models in 1:32 scale in plastic (that'd make the mighty large pickup truck about eight inches long) but the digital files let users tweak the scale to the their liking. Once people have the digital files, they can print out their own miniature versions of the cars, made out of soft plastics, sandstone, and even some metals. Ford says it expects demand for such files to grow as sales numbers for desktop 3D printers surges to 1 million units in 2018. That's up from about 44,000 last year. Ford already offers digital files for its company logo, the 1.0-liter engine block, and two older Mustang models. But these new models take this to a totally different scale. Check out Ford's press release below. PRINT YOUR FAVORITE FORD VEHICLE AT HOME: FORD FIRST AUTOMAKER TO OPEN ONE-STOP 3D SHOP ONLINE - Consumers can now download digital images and 3D-printable files of Ford vehicles at the first-ever automaker-licensed, one-stop 3D shop online - The Ford 3D Store offers printable files of F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST; more models will become available later - Online store is powered by TurboSquid.com, the leader in providing automotive digital imaging and 3D-printable files Want to 3D-print a Shelby GT350R at home? Or would you prefer to simply purchase an F-150 Raptor 3D digital image for a presentation? How about both? Ford fans can now download digital images for Ford vehicles at the first-ever, automaker-authorized one-stop online store for 3D-printable vehicle files. The Ford 3D Store, 3d.ford.com, allows customers to use advanced technology to make their own models of Ford vehicles of the size and material they desire, or simply opt to purchase a 3D digital file from a growing library of more than 1,000 Ford images. "3D printing at home is a growing trend, and it makes sense for us to offer our customers a chance to make their own 3D Ford models," said Mark Bentley, licensing manager, Ford Global Brand Licensing.