1964 Ford Falcon on 2040-cars

Auto blog

Ford, Samsung shack up to bring regen braking to non-hybrid models [w/video]

Ford must be desperate to get itself ready for the beach this summer because it is really trying to get into shape. Shortly after unveiling the Lightweight Concept that cut the weight of a Fusion down to that of a Fiesta, it's now the rest of the line's turn for improvement. The company is wrapping up a 10-year research project aimed at developing next-gen automotive batteries to improve efficiency.
Ford claims that 70 percent of its lineup will have stop/start tech by 2017. The key to this massive proliferation is its new dual-battery system that combines a lithium-ion battery with a lead-acid one and regenerative braking. The setup works by harvesting braking energy and converting it to electricity. When the vehicle stops, the engine shuts off, but the Li-ion battery has enough juice to keep the accessories running. The engine starts up again as drivers take their foot off the brake. The layout would mean less wasted gas while idling. It's already available on Ford hybrids and is somewhat similar to the i-Eloop capacitor-based system from Mazda.
The bigger challenge is tuning the regenerative braking right. While hybrid drivers may be a little more adventurous, when it comes to getting a hang of regen braking, conventional buyers might not be so open-minded. The systems have a tendency to be a little grabby at first and then taper off at very low speeds. Ford needs to make sure it's just right to avoid turning off buyers.

Ford recalls 650,000 trucks and SUVs for defective wipers

Ford announced earlier this month that it is recalling 652,996 F-Series pickups, Expeditions and Lincoln Navigators produced for the 2020 and 2021 model years to address an issue that may cause their windshield wipers to separate, reducing visibility and leading to potentially hazardous driving conditions.  According to the Blue Oval, one of its suppliers used worn tooling components that resulted in wiper arms being produced with splines that are not tall enough to fully engage the motor pivots they're mounted to, which can cause the connection to strip when the motors are turned on. This could result in the wiper arms not moving at all, or engaging only intermittently.  "Worn wiper arm spline tooling core inserts at the supplier resulted in insufficient spline tooth height, which can cause the arm attachment to strip when used with a certain wiper motors with higher torque," Ford said in its defect report to NHTSA. "Potential symptoms include erratic or slow wipe speed of the driver or passenger wiper arm. An improper functioning wiper arm may potentially result in reduced visibility in certain conditions, which could increase the risk of a crash." Ford says the vehicles were not produced in VIN order, so while not all of the nearly 653,000 vehicles have bad wiper arms, they're all suspect until proven safe. Ford will notify owners of the recall campaign starting in May.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Recalls Ford Lincoln Safety Truck SUV

Ford's BlueCruise gains hands-free lane changes and more in update

Ford is sending out an update to BlueCruise that will enhance its functionality with some nice features we tend to enjoy on other advanced driver assistance systems. Plus, in addition to BlueCruise getting the update, the Lincoln version named ActiveGlide will get the same update. For starters, both BlueCruise and ActiveGlide will gain hands-free lane changing. Similar to other lane-change assist systems, you’ll prompt the lane change by activating the turn signal. ItÂ’ll scan for traffic, and if all is clear, the vehicle will move into the requested lane. Ford says that itÂ’ll even suggest lane changes to the driver in the cluster as you approach slower-moving traffic. What this new feature doesnÂ’t do, though, are automatic lane changes. Systems like Super Cruise and TeslaÂ’s Autopilot will recognize slower traffic, then make a pass all on their own to move around said traffic — theyÂ’ll even move back over into your previous lane after making the pass. We wouldnÂ’t be surprised if Ford adds this functionality to the system in a future update. Another update in this release is new “In-Lane Repositioning” programming. ItÂ’s designed to recognize when there are vehicles in adjacent lanes and will then shift you further away from them within your lane of travel. Ford says itÂ’s especially helpful when passing semi-trucks, and will give you the usual and more comfortable buffer that a human driver might give a truck. The final update is a Predictive Speed Assist feature that will adjust your speed as you approach a curve. It will signal to the driver in the cluster that the car will slow for a curve, then do so gradually as you approach it. This is the sort of feature we typically like to turn off as soon as possible, since weÂ’d rather just remain at the same speed for curves on the highway. But, if youÂ’re one of those folks who like to slow down for curves on the highway, this will provide a more natural driving feel. Ford says that customers have cumulatively put over 16 million hands-free miles on cars with BlueCruise at this point. This update, simply named 1.2, for BlueCruise and ActiveGlide will see its initial rollout this fall. It will hit the Mustang Mach-E first, and Ford says other vehicles will follow. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. POV drive of the 2021 Ford Mustang Mach-E