1956 Ford Fairlane Base 4.8l on 2040-cars

Auto blog

Mustang parts under the new Lincoln Aviator mean good things for Ford

NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

UK Mustang buyers want big American V8s

Just before Ford ended its marketing partnership with Europe's UEFA Champions League soccer tournament last year, it showcased the 2015 Mustang during the event final in Lisbon, Portugal. Ford put 500 Mustangs up for pre-order to viewers in 20 countries, 130 of them right-hand-drive models for the UK. It didn't take 30 seconds for every car to be snapped up because almost 10,000 people tried to buy them. That's how hungry Europe is for the Mustang. That helps explain why orders for the pony car in the UK already number almost 2,000 units, which ties up production past July 2016. Ford UK released a few details on the order habits of that kingdom united, saying 80 percent have taken the coupe over the convertible, and 70 percent have gone for the 410-horsepower, 5.0-liter V8. That compares to 52 percent of US buyers taking the V8 instead of the V6 or the 2.3-liter Ecoboost. The UK V8 output number is 25 ponies down on our US model because of the switch to right-hand drive, the steering assembly location requiring a new exhaust manifold. The 2.3-liter EcoBoost is the only other engine offered there. The row-your-own set nips the slushbox crowd, 55 percent of buyers choosing the six-speed manual, and Race Red is the most popular of the ten available colors with 23-percent uptake. The graphic above breaks it all down, the press release below spells it all out. Related Video FIRST UK DELIVERIES IN SIGHT AS FORD MUSTANG ORDERS ACCELERATE TOWARDS 2,000 BRENTWOOD, Essex, UK, August 24, 2015 – Almost 2,000 Ford Mustang orders have been taken in the UK since January as the first right-hand drive cars begin to roll off the production line at Flatrock Assembly Plant in Michigan, North America. The Ford Mustang – introduced in the U.S. more than 50 years ago – has excited fans across the globe, but has never been available to order with right-hand drive, until now. The first UK customer deliveries are expected from November, with extra supply secured to meet the greater than expected demand. So far, 80 per cent of UK customers have opted for the fastback body style over the convertible and 70 per cent have specified the 416PS 5.0-litre V8 engine over the more fuel-efficient 317PS 2.3-litre EcoBoost engine. Mustang's six-speed manual transmission is the slightly more popular choice (55 per cent) over the six-speed automatic, which comes with sporty SelectShift paddle control.