2008 Ford F-450 Super Duty Xl Crew Cab Pickup 4-door 6.4l on 2040-cars

Auto blog

Ford shutters Genk assembly plant in Belgium

Ford has become the latest automaker to close one of its European assembly plants. The facility in question is located in the Belgian city of Genk and has been in operation since the early '60s when it started building the Taunus, Ford's first mass-produced, front-drive model. As part of the plan first announced over two years ago, the Genk Body & Assembly Plant is now closing its doors after half a century in the business and over fourteen million vehicles built. Although the plant itself employed some 5,000 workers, once you take into account the suppliers built up around the plant, the overall impact on employment in the area edges closer to 12,000. Genk Body & Assembly had until recently been tasked with producing the Mondeo sedan (which in its current iteration we know as the Fusion) as well as the S-Max and Galaxy minivans. Production of the Mondeo shifted in 2013 to the company's plant in Valencia, Spain, which also handles the Kuga crossover and Transit Connect cargo van, and will soon take over the minivans from Genk as well. The move follows a similar decision undertaken by General Motors to close the Opelwerk plant in Bochum, Germany. It also reflects a scaling down of automobile production in Belgium specifically: although Audi still manufacturers in Brussels and and Volvo in Ghent, Opel closed its plant in Antwerp in 2000 and Renault ceased production in Vilvoorde back in '97. However Ford still maintains its famous proving ground half an hour to the north in Lommel, Belgium. News Source: AutovisieImage Credit: Kristof Van Accom / AFP / Getty Plants/Manufacturing Ford plant ford s-max ford galaxy

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

All the details on Plug In 2014 electric vehicle conference you could ever want

One of the best parts of the Plug In 2014 Conference in San Jose, CA last week was getting to listen in on thoughts about the state of the plug-in vehicle industry from people who have been involved with it for ages. They bristle when you call them the "Old Guard" (learned that one the hard way), but these are the people who have been through a number of ups and downs with plug-in vehicles, so they've got what we call perspective. Their knowledge was on full display in the three plenary sessions, which the Plug In Conference organizers have given us permission to share with you. Each is at least 90 minutes long, so make sure to set some time aside to enjoy the discussions after you download them (any help with making them streamable would be appreciated). Follow us below to see what we've got to offer. Opening Plenary (audio link). "The Road Ahead – Delivering on a Vision for Sustainable Transportation." Moderated by Mark Duvall (director of energy utilization at EPRI, the Electric Power Research Institute, and a long-time EV advocate), this panel featured: Jack Broadbent, Executive Officer / APCO, Bay Area Air Quality Management District Pat Romano, President & Chief Executive Officer, ChargePoint, Inc. Aaron Johnson, Senior Director, Customer Programs, Pacific Gas and Electric Company Brendan Jones, Director, EV Sales Operations & Infrastructure Deployment, Nissan North America, Inc. David W. Cash, Commissioner, MassDEP Dan Sperling, Director, Institute of Transportation Studies, University of California, Davis Highlights: Educating drivers to "get over the gas station" is a key strategy, how Level 2 and DC Fast Charging are really "a new paradigm," that there have been well over 214,000 EVs sold in US as of July 2014 and where Nissan sees huge potential for more EV sales (Northeast US and medium-size cities like St. Louis and Pittsburgh). Wednesday Morning Plenary (audio link). "Getting to the Mass Market – A Discussion of Ideas for Widespread PEV Adoption." Moderated by John Gartner, research director for smart transportation at Navigant Research.