Ford F350 4x4 Utlity Body Work Truck 2006 on 2040-cars
Hawthorne New Jersey, United States
Vehicle Title:Clear
Engine:6.0
Fuel Type:Diesel
For Sale By:Private Seller
Number of Cylinders: 8
Make: Ford
Model: F-350
Cab Type (For Trucks Only): Regular Cab
Trim: XL
Options: 4-Wheel Drive
Drive Type: 4X4
Safety Features: Anti-Lock Brakes, Driver Airbag, Passenger Airbag
Mileage: 123,456
Power Options: Air Conditioning
Sub Model: XL
Exterior Color: White
Interior Color: Gray
Warranty: Vehicle does NOT have an existing warranty
This is a f350 ford 4x4 utility body work truck it has 18 inch aluminum rims we have just replaced the following the ficam fuel injection computer ,the fan clutch ,egr valve,4 injectors, the oil pump, and the egr cooler. The air conditioning is ice cold the truck just had new rotors and sever duty break pads installed in the front end also. And a new blinker arm switch assembly.In the bed it has the 2 runner plates welde into the bed for easy tie down capability.
Ford F-350 for Sale
F-350 crew cab, diesel,4x4 lariat,loaded, 86,000 miles very clean,original owner(US $20,000.00)
1979 ford truck f350 ranger super camper special standard cab notre dame, eagles
1995 ford 1 ton duelly with welding bed
Crew cab lariat 4x4 powerstroke diesel navigation roof leather low miles auto
2004 f350 lariat diesel(US $12,500.00)
Ford f350 lariat extended cab 7.3 powerstroke turbo diesel no reserve 8' bed 4x4
Auto blog
Bring back the Bronco! Trademarks we hope are actually (someday) future car names
Tue, Mar 17 2015Trademark filings are the tea leaves of the auto industry. Read them carefully – and interpret them correctly – and you might be previewing an automaker's future product plans. Yes, they're routinely filed to maintain the rights to an iconic name. And sometimes they're only for toys and clothing. But not always. Sometimes, the truth is right in front of us. The trademark is required because a company actually wants to use the name on a new car. With that in mind, here's a list of intriguing trademark filings we want to see go from paperwork to production reality. Trademark: Bronco Company: Ford Previous Use: The Bronco was a long-running SUV that lived from 1966-1996. It's one of America's original SUVs and was responsible for the increased popularity of the segment. Still, it's best known as O.J. Simpson's would-be getaway car. We think: The Bronco was an icon. Everyone seems to want a Wrangler-fighter – Ford used to have a good one. Enough time has passed that the O.J. police chase isn't the immediate image conjured by the Bronco anymore. Even if we're doing a wish list in no particular order, the Bronco still finds its way to the top. For now (unfortunately), it's just federal paperwork. Rumors on this one can get especially heated. The official word from a Ford spokesman is: "Companies renew trademark filings to maintain ownership and control of the mark, even if it is not currently used. Ford values the iconic Bronco name and history." Trademarks: Aviator, AV8R Company: Ford Previous Use: The Aviator was one of the shortest-run Lincolns ever, lasting for the 2003-2005 model years. It never found the sales success of the Ford Explorer, with which it shared a platform. We Think: The Aviator name no longer fits with Lincoln's naming nomenclature. Too bad, it's better than any other name Lincoln currently uses, save for its former big brother, the Navigator. Perhaps we're barking up the wrong tree, though. Ford has made several customized, aviation themed-Mustangs in the past, including one called the Mustang AV8R in 2008, which had cues from the US Air Force's F-22 Raptor fighter jet. It sold for $500,000 at auction, and the glass roof – which is reminiscent of a fighter jet cockpit – helped Ford popularize the feature. Trademark: EcoBeast Company: Ford Previous Use: None by major carmakers.
Aluminum lightweighting does, in fact, save fuel
Mon, Apr 14 2014When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).
Britain orders 10,000 ventilators from F1/McLaren/Mercedes/Ford/Rolls-Royce/Airbus
Mon, Mar 30 2020Paramedics and ambulance personnel get instructions from a command unit outside London's ExCel Centre arena, which is being turned into a 4,000 bed temporary hospital called NHS Nightingale to deal with coronavirus patients. The hospital is due to open Monday, March 30. / AP Â Â LONDON — Britain has ordered 10,000 ventilators from a consortium of leading aerospace, engineering and Formula One racing companies which will start production this week in response to an urgent government call for industry to help save lives. The 27-strong team, including Airbus, BAE Systems, Ford and Rolls-Royce, have joined forces to ramp up production of a ventilator made by Smiths Group, which supports those with complications from COVID-19. The consortium, which also includes seven Formula One teams including McLaren and Mercedes, home to World Champion Lewis Hamilton, said they had pulled staff off existing projects to meet the national need. Some 1,228 people have died from coronavirus in the United Kingdom and a senior health official said on Saturday the country would be doing well if it manages to keep the death toll below 20,000. "This consortium brings together some of the most innovative companies in the world," Dick Elsy, the head of the consortium, said in a statement. "I am confident this consortium has the skills and tools to make a difference and save lives." The United Kingdom, which initially only had 5,000 ventilators available in its National Health Service, has been trying to secure additional supplies after realising it needed 30,000 to cope with the peak of the outbreak. Prime Minister Boris Johnson, who is now in isolation in Downing Street after testing positive for coronavirus, made an emergency appeal earlier this month for manufacturers to retool their production lines and start making specialist health equipment including ventilators. Britain now has about 8,000 ventilators, with another 8,000 on order from international manufacturers that are due in coming weeks. Last week it placed an order for a newly-designed model from the vacuum cleaner company Dyson that will need to be approved by the health regulator. Mercedes part of a separate effort, too Separately on Monday a second consortium including Mercedes Formula One and other F1 teams said it had developed in less than a week a new version of a breathing aid that can help coronavirus patients.