Diesel Truck 6.0l Cd King Ranch Chrome Package 4 Speakers Am/fm Radio Voltmeter on 2040-cars

Auto blog

Ford Fusion production scaled back just 3 months after it was accelerated

Three months after kicking off production of the Ford Fusion at its Flat Rock, MI factory, Ford Motor Company is taking steps to trim output in the face of heavily discounted competition from Toyota and a growing supply of vehicles.
The addition of Fusion production in Flat Rock - which also builds the Mustang - was meant to be what pushed the handsome mid-sizer past its arch-nemesis, the Toyota Camry. An extra facility building Fusions was also meant to curb the growing demand for Ford's highly profitable sedan.
But with word that Flat Rock would take "approximately" one extra week off for the holidays combined with an 88-day supply of Fusions - reportedly due in no small part to what Morgan Stanley analyst Adam Jonas called "aggressive discounting of the Camry" - some analysts are now beginning to wonder if Ford may have overextended itself by adding a second Fusion facility to the mix.

Slew of Ford recalls affect more than a million vehicles

Ford is closing out September with the sad task of alerting owners to five different recalls, two of them camera related. The first is a safety compliance recall affecting 620,246 units of 12 models from the 2020 model year: Edge, Escape, Expedition, Explorer, F-150 and Super Duty, Mustang, Ranger, and Transit, plus the Lincoln Corsair, MKX, and Nautilus. On these vehicles, the circuit board in the rearview camera suffers from insufficient electrical conductivity. The issue can cause the resulting image to not appear or to be distorted, which can lead to an accident while reversing. Ford will begin notifying owners as of November 7 to get their vehicles to dealers for replacement of the rearview camera. The internal Ford reference for this recall is 20C19. The second camera-related issue affects the 2020 and 2021 Ford Explorer, Lincoln Corsair and Lincoln Aviator with the 360-degree camera. Technically, if you own a 2021 Explorer that only has a rearview camera and not a 360-degree camera, neither the above recall nor this one apply to you, but it's probably better safe than sorry here. There are 354,330 crossovers covered by this action. A video output issue could cause the displayed image to cut out, increasing the chances of a reversing accident. Ford will notify dealers starting October 7, the fix being to have a dealer update the Image Processing Module software. The NHTSA campaign number for this recall is 21V735, Ford’s internal reference number is 21S44.  The F-250 and F-350 Super Duty are in for another recalls thanks to potentially improper welds on the front axle's wheel end yoke. A bad weld could alter steering performance, getting the truck to pull left or right, or change the sensitivity of the steering. There are 9,628 affected trucks in the U.S. and 961 in Canada. Dealers will replace the axle assembly if any bad welds are found. Ford's reference number for this is 20S56. The fourth recall affects 38,005 Mustangs in the U.S. and another 2,873 Mustangs in Canada and Mexico from the 2020 model year. In this instance, the brake pedal bracket might fracture during sudden stopping, which can decrease brake pressure and increase the chances of an accident. Ford's internal reference for this recall is 20S52, the fix being to have a dealer replace the brake pedal bracket assembly. Finally, 126,033 units of the 2011 to 2013 Explorer are being recalled over a potential suspension issue.

Ford S-Max Concept proves minivans aren't always minivans [w/video]

Ford's latest don't-call-it-a-minivan is called the S-Max Concept, and it's a looker. As you can see, the conceptual overgrown hatch makes good use of Ford's latest design language, especially at the very front of the S-Max, which bears a striking resemblance to production models that include the Focus, C-Max and Fusion.
Powering the S-Max Concept is a 1.5-liter EcoBoost engine, and while Ford doesn't actually list power figures for the concept, previous estimates put the mill at 133 kW of power (about 178 horsepower) and 240 Nm of torque (about 177 pound-feet). Inside, there's room for seven passengers and at least some of their luggage.
As you'd expect, the S-Max is loaded up with all of Ford's latest infotainment technology, including Sync and MyFordTouch. More interestingly, there are also onboard heart and blood glucose monitors that we doubt will be seeing the light of production anytime soon. On that topic, don't expect to see any S-Max-shaped vehicles hitting the US market from Ford, either. Scroll down below for the press release, but not before checking out the high-res image gallery above.