2014 Drw Lariat Crew 4x4 Fx4 Navigation Sunroof Leather Heated V8 Diesel on 2040-cars

Auto blog

Ford Green Zone works magic with GPS to make your drive smarter, cleaner

For the most part, plug-in hybrids rely on the power stored in the battery until that charge is depleted. Unless the switch can be changed manually, it's only then that the cars fire up the internal combustion engine and begin using the fossil fuels on board. This is ideal, of course, when one's drive isn't long enough that the car needs to start sipping gasoline at all. On longer commutes, when it's certain that the route is longer than the car's all-electric range, this isn't necessarily the most efficient use of energy. Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds. Ford is working on a smart system, based on Nokia mapping technology, that uses GPS data to use both the electricity and conventional fuel more efficiently. Since battery power is less efficient at highway speeds, Ford's Green Zone system is designed to save some of that juice for the parts of the drive that require slower speeds, rather than just using up all the electrons right at the beginning of the drive. Using a website or the in-car navigation system, the driver can pinpoint the parts of the route, highlighted in green, where using battery power would be more effective, and set the car to automatically switch to electricity for those sections. Depending on the route, the car could automatically switch back and forth between the two power sources multiple times, particularly if the drive is a mix between city and highway driving. Of course, Green Zone will be go beyond that. The program is being developed to take traffic and road grade into account, details that allow the car to be make even smarter choices to improve efficiency. Ford even hopes to have Green Zone learn driver habits, and respond accordingly depending on who is driving the car. The system could control other features as well, such as anticipating corners and shifting the headlights to better illuminate the road ahead. Green Zone could also potentially use information from vehicle-to-vehicle networking to control functions in the car. The Green Zone system still has a few years before it will be ready to be put into production vehicles, but Ford is confident it will make its way onto the road eventually. As with other innovations that improve efficiency and make our vehicles smarter, we can expect to see similar technology from other manufacturers, until it becomes a regular part of driving in the future.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

Ford to add more than 2,000 jobs in Kansas City

Continued high demand for the Ford F-150, along with the addition of the all-new Transit series of commercial vehicles, has led Ford to announce that it will add over 2,000 jobs at its Kansas City Assembly Plant. At the time of the announcement, the plant boasts 2,450 hourly employees working on two shifts. All told, Ford will invest $1.1 billion in the Kansas City plant to expand truck production and begin producing the Transit series.
According to the automaker, fullsize truck sales are up 19 percent through April of 2013, leading to an additional 900 workers and a third shift of production for the F-150. Production of the Transit series will begin in the fourth quarter of this year, requiring an additional 1,100 workers. In addition, Ford estimates that a total of 18,000 jobs will be created by suppliers to its Kansas City plant to support the additional vehicle production.
Want to know more? Scroll down for the complete press release.