2011 Ford F350 Lariat Navigation Sat. Radio Woodtrim 4x4 Heated/cooled Seats on 2040-cars

Auto blog

Ford recalls EcoBoost-powered F-150 and SUVs for brake fluid leak

Ford is recalling approximately 280,000 trucks and SUVs equipped with its 3.5-liter EcoBoost engine to address a potential brake fluid leak. The recall covers the 2016-2017 Ford F-150, 2016-2017 Ford Expedition and the 2016-2017 Lincoln Navigator.  According to Ford's defect report, the issue stems from contamination in the brake fluid causing degradation or damage to the seals in the brake master cylinder, allowing fluid to escape. Ford says that braking performance is not immediately impacted by the leak, and owners may not realize there's a problem until a brake malfunction indicator appears in the cluster, accompanied by a chime.  "If the brake fluid in the reservoir is depleted to a predetermined level, the driver will receive an audible chime, message center alert, and red brake warning indicator in the instrument cluster," Ford said in its defect report to NHTSA. "If the driver continues to operate the vehicle, the drive may begin to experience a change in brake pedal travel and feel, and increased pedal effort." "If a loss of brake fluid is substantial enough to reduce brake function to the front wheels, full braking function would remain in the rear wheel circuit. However, reduced brake function in the front wheels can extend stopping distance, increasing the risk of a crash," Ford said.  The issue can be addressed with a replacement brake master cylinder, which Ford will install free of charge. Ford has already begun notifying dealers and will send notices to customers starting in April.  Recalls Ford Lincoln Ownership Safety Truck SUV

For EV drivers, realities may dampen the electric elation

The Atlantic, a decades-old monthly journal well-regarded for its intelligent essays on international news, American politics and cultural happenings, recently turned its attention to the car world. A piece that ran in The Atlantic in October examined the excesses of the GMC Hummer EV for compromising safety. And now in its latest edition, the magazine ran a compelling story about the challenges of driving an electric vehicle and how those experiences “mythologize the car as the great equalizer.” Titled “The Inconvenient Truth About Electric Vehicles,” the story addresses the economics of EVs, the stresses related to range anxiety, the social effects of owning an electric car — as in, affording one — and the overarching need for places to recharge that car. Basically, author Andrew Moseman says that EV life isn't so rosy: “On the eve of the long-promised electric-vehicle revolution, the myth is due for an update. Americans who take the plunge and buy their first EV will find a lot to love Â… they may also find that electric-vehicle ownership upends notions about driving, cost, and freedom, including how much car your money can buy. "No one spends an extra $5,000 to get a bigger gas tank in a Honda Civic, but with an EV, economic status is suddenly more connected to how much of the world you get to see — and how stressed out or annoyed youÂ’ll feel along the way.” Moseman charts how a basic Ford F-150 Lightning electric truck might start at $55,000, but an extended-range battery, which stretches the distance on a charge from 230 miles to 320, “raises the cost to at least $80,000. The trend holds true with all-electric brands such as Tesla, Rivian, and Lucid, and for many electric offerings from legacy automakers. The bigger battery option can add a four- or five-figure bump to an already accelerating sticker price.” As for the charging issue, the author details his anxiety driving a Telsa in Death Valley, with no charging stations in sight. “For those who never leave the comfort of the city, these concerns sound negligible," he says. "But so many of us want our cars to do everything, go everywhere, ferry us to the boundless life we imagine (or the one weÂ’re promised in car commercials),” he writes. His conclusions may raise some hackles among those of us who value automotive independence — not to mention fun — over practicalities.

Now you can 3D print your favorite new Ford

Ford is letting people build their own cars, offering digital files so people can print 3D versions of their favorite models. This is way cooler than any old Matchbox or Hot Wheels toy. Ford this week started offering printable files for the F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST. Folks can order the 3D models in 1:32 scale in plastic (that'd make the mighty large pickup truck about eight inches long) but the digital files let users tweak the scale to the their liking. Once people have the digital files, they can print out their own miniature versions of the cars, made out of soft plastics, sandstone, and even some metals. Ford says it expects demand for such files to grow as sales numbers for desktop 3D printers surges to 1 million units in 2018. That's up from about 44,000 last year. Ford already offers digital files for its company logo, the 1.0-liter engine block, and two older Mustang models. But these new models take this to a totally different scale. Check out Ford's press release below. PRINT YOUR FAVORITE FORD VEHICLE AT HOME: FORD FIRST AUTOMAKER TO OPEN ONE-STOP 3D SHOP ONLINE - Consumers can now download digital images and 3D-printable files of Ford vehicles at the first-ever automaker-licensed, one-stop 3D shop online - The Ford 3D Store offers printable files of F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST; more models will become available later - Online store is powered by TurboSquid.com, the leader in providing automotive digital imaging and 3D-printable files Want to 3D-print a Shelby GT350R at home? Or would you prefer to simply purchase an F-150 Raptor 3D digital image for a presentation? How about both? Ford fans can now download digital images for Ford vehicles at the first-ever, automaker-authorized one-stop online store for 3D-printable vehicle files. The Ford 3D Store, 3d.ford.com, allows customers to use advanced technology to make their own models of Ford vehicles of the size and material they desire, or simply opt to purchase a 3D digital file from a growing library of more than 1,000 Ford images. "3D printing at home is a growing trend, and it makes sense for us to offer our customers a chance to make their own 3D Ford models," said Mark Bentley, licensing manager, Ford Global Brand Licensing.