2008 Ford F350 Super Duty Xl Non Running 6.4 Power Stroke Diesel Cab Chassis on 2040-cars
San Antonio, Texas, United States
|
NON RUNNING!! Cab Chassis ONLY! 2008 FORD F-350 XL SUPER DUTY 4X2 DUALLY DIESEL!!! PERFECT PROJECT TRUCK FOR SKILLED TECH! If you have been looking for a great work truck then LOOK NO MORE! This 2008 Ford F-350 not only has a lot of power, it also has the utility to get the job done right. You are bidding on the Cab Chassis only! Powered by Ford’s 6.4L V-8 Turbo Diesel Engine, Heavy Duty Automatic Transmission, this truck is easy to drive and provides the power and agility you need and deserve. Although this truck is designed for heavy work in mind, it also has the comforts and features you will be glad to have like, Full Cloth Comfort Seats with a front fold down storage area, Tilt Steering Wheel, Cruise Control, AM/FM CD Stereo with Speakers throughout, Auxiliary Power Control Switches, High Output Air Conditioning System, Dual Air Bags for your safety This truck was well maintained up to the point of failure and when the engine is repaired should provide you with miles of great service. The cab to axle measurement is approximately 84 and should accommodate an 11-13' body.
CONDITION REPORT: The truck was well maintained up to the point of engine failure. We should have purchased the extended warranty, our ;loss your gain. The transmission shifted smoothly and performed normally. The truck drove very well and the mechanical aspects appear to be in good working order. The frame and undercarriage are in good condition. The interior of the truck is in above average condition but does have a few stains/ small tears in the driver and passenger seats. The electrical components functioned n normally. The exterior is bright red and the paint is in above average condition with only small scratches and chips. The windshield is cracked. All other glass is in above average condition and is free of visible chips and cracks. The tires are in above average condition and should provide you with excellent service. As with any vehicle with 129k miles of use, I am sure there are a few things I have missed that might need attention, however I think you will find this truck in very good working order and at the reserve price offers a great value to you or your company.
Excluding Engine: OVER ALL CONDITION IS RATED AT: ABOVE AVERAGE
KELLY BLUE BOOK PRIVATE PARTY VALUE $10,200.00
DO NOT MISS THIS OPPORTUNITY TO OWN A GREAT TRUCK AT A PRICE YOU MIGHT NOT HAVE THOUGHT POSSIBLE! RESERVE SET LOW! |
Ford F-350 for Sale
2008 ford f350 diesel 4x4 srw long bed lariat dvd leather crew texas(US $27,885.00)
2005 srw xl extended 4x4 trailer hitch grill guard v8 triton tan cloth
1995 ford f-350 rack dump truck
2011 ford f350 lariat crew fx4 4x4 diesel drw nav 28k texas direct auto(US $45,780.00)
2005 ford f350 crewcab 4x4 dually(US $12,500.00)
2008 ford f350 4x4 diesel lariat(US $21,500.00)
Auto Services in Texas
World Tech Automotive ★★★★★
Western Auto ★★★★★
Victor`s Auto Sales ★★★★★
Tune`s & Tint ★★★★★
Truman Motors ★★★★★
True Image Productions ★★★★★
Auto blog
Ford cleans up painting process with cameras
Thu, 22 Aug 2013Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.
2016 Ford Focus RS may yet be AWD, US sales likely
Fri, 29 Aug 2014When it comes to forbidden fruit, few vehicles are spoken of in as hushed a tone as the Ford Focus RS. The turbocharged, five-cylinder hot hatch could only be seen from afar by American customers as it tore up the roads of Europe. And while it's safe to say that Ford's Yankee fans are quite happy to now be on equal footing with drivers in the old country thanks to the Focus ST, we doubt there'd be much protestation over a successor to the RS arriving stateside.
Of course, we've seen images of the new RS undergoing testing, but a new story by Road and Track aims to fill in some very large blanks in our knowledge of that car, thanks to a pair of mysterious insiders at the Ford. Chief among those is this - the RS will almost certainly make its way to the US, albeit in limited quantities. It gets better, though.
Under hood, the new RS is unsurprisingly expected to borrow the 2.3-liter, turbocharged four-cylinder from the 2015 Ford Mustang and 2015 Lincoln MKC. While that twin-scroll turbo produces 310 horsepower in the Mustang and 285 ponies in the MKC, R&T expects the RS to deliver quite a bit more firepower - 325 to 350 hp, with preference going to the higher output due to the limited-edition nature of the RS. This roughly fits with previous reports.
2015 F-150 launch to curb Ford profits?
Thu, 30 Jan 2014Ford is making a big bet on aluminum with its new 2015 F-150, and it's possible that the decision will hurt the company financially, at least in the short term. After earning a record $8.6 billion in 2013, the Blue Oval does not expect to set another record in 2014. According to Automotive News, that's "largely attributable to F Series," says Bob Shanks, Ford's Chief Financial Officer.
To retool for the new F-150, Ford will idle its Dearborn Truck Plant in Michigan for 11 weeks and the Ford Kansas City Assembly Plant in Missouri for 2 weeks. "3 of the 13 overall weeks occur during what normally is our summer shutdown timeframe," said Mike Levine, Ford Trucks Communication Manager, in an email to Autoblog. The extra 10 weeks will be preparing for the more aluminum-intensive construction for the trucks and will mean over 2 months of no F-150s being made. For comparison's sake, Chrysler boss Sergio Marchionne just confirmed that the 200 plant in Sterling Heights, MI will be down for 30 days to retool for the new model, but obviously there are many more F-150 production variables than for the midsize sedan.
Levine notes that Ford is already running three shifts at both plants, and says the automaker has plans to ensure that there is adequate supply of the full-size pickups during the retooling process. The company does not want to suffer a shortage of the vehicle that accounted for 31-percent of its 2013 US sales and an even bigger percentage of its profits.