2008 - Ford F-350 on 2040-cars

Auto blog

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.

Automakers' rush on aluminum may result in shortage

Aluminum is the new buzzword in the automotive industry. The latest Range Rover and Range Rover Sport both take advantage of the lightweight material to shave huge amounts of body fat (only it's called "aluminium" over there). Audi and Jaguar have been using the stuff for years in their A8 and XJ, respectively, and now, aluminum is going mainstream, arriving on the 2015 Ford F-150.
While we're excited to see aluminum make an impact outside the premium market, its widespread adoption apparently won't come without some problems, notably in terms of supply. "There isn't an automotive manufacturer that makes vehicles in North America that we're not talking to," Tom Boney, of Novelis, the largest global supplier of aluminum sheetmetal, told The Detroit News.
According to Boney, Ford's use of aluminum on such a large scale has forced auto manufacturers in "every boardroom" to reconsider their plans following the F-150's unveiling, for one simple reason: there's not exactly enough aluminum to go around, at least in the short term. The auto industry presently only accounts for six percent of the aluminum sheet produced, but as the material is adopted by more and more brands, that figure is expected to swell to 25 percent within the next six years.

Jay Leno drives postcard-perfect '32 Ford Highboy Roadster

At the turn of the century, it was arguably the Honda Civic that best defined inexpensive performance tuning, and in the '50s it was the Tri-5 Chevys. One of the earliest platforms to gain a huge following among young people looking for a cheap way to go fast was the classic '32 Ford Highboy Roadster. This week, Jay Leno's Garage looks at one of the very first vehicles that defined the look of the hot rod heyday.
This '32 Ford was built in the '40s and graced the cover of the fourth issue of Hot Rod Magazine back in 1948. All of the hot rods that you see shining at car shows today owe a serious debt of gratitude to this roadster. It bears all of the cues that define the look, including a notched frame and hidden door hinges. Under the three-piece hood is a flathead V8 boasting all sorts of period modifications, including copper cylinder heads. It was seriously fast in its era too, and proved it by reaching 112.21 miles per hour on a dry lakebed in 1947.
These days, this hot rod is on display at the Petersen Automotive Museum. Although, if you can't make it to California to see it, the United States Postal Service is celebrating this Ford with one of its two hot rod Forever stamps. Like Jay says in the video, in terms of hot rodding, "it all comes back to this." Check out the video to learn more about this rolling piece of tuning history.