2000 Ford F350 Super Duty 4 Door Lariat 4x4 Diesel 7.3l Turbo on 2040-cars

Auto blog

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

2017 Ford GT spied in the raw

The Ford GT supercar is finally going outside to play, and it has been captured for the first time prowling the streets near Ford's compound in Dearborn, MI. Due in late 2016, the GT has been one of Ford's most closely guarded projects and was developed under a veil of secrecy. The prototype revealed at the Detroit Auto Show stunned enthusiasts, and these shots illustrate that it's making the leap to production reality. As our spy shooter wryly notes, the mule captured in these photographs looks like a Mad Max prop. It's colorless, is missing key body parts – note the ringless taillights and lack of a rear bumper or diffuser. It also looks to be even lower to the ground than the concept from the Detroit show. It appears to have different mirrors and windshield wipers. The lack of some body panels also calls out the exhaust pipes, which look like tail guns in these shots. Otherwise, this test car looks just like the auto show star, and sans paint it manages to appear even more sinister. Though these spy shots indicate the GT is on track for production, Ford has been pretty up front about what the car will be when it arrives in showrooms. We know it will have a twin-turbo EcoBoost V6 paired with a seven-speed dual-clutch gearbox. It will make extensive use of carbon fiber and feature a driver-oriented, contemporary-styled interior. Canadian company Multimatic will build the GT. The Le Mans-inspired supercar is the standard-bearer for Ford's renewed performance push. The automaker plans to roll out at least 12 sporting cars by 2020 as it looks to lure new buyers to its fold. Ford also using developments from these high-end cars to improve its lineup, and will it spread aerodynamics and materials technologies across its portfolio. "It's another proof point about how serious we are in developing innovation through performance," Ford product chief Raj Nair has said. Related Video: Featured Gallery 2017 Ford GT Spy Photos View 25 Photos Related Gallery Ford GT Concept: Detroit 2015 View 45 Photos Image Credit: Chris Doane Automotive Motorsports Ford Coupe Performance Supercars

Ford recalls 1.3 million Fusions, MKZs: Steering wheels could come off

When driving a car, the steering wheel is only expected to move in a rotational fashion, either clockwise or counter-clockwise. When it moves in some other direction, something is wrong, and when it moves the wrong way enough that it is no longer attached to the steering column, that's a really, really bad thing. And apparently, according to a recall issued by Ford, there are over 1.3 million Ford Fusions and Lincoln MKZs that are at risk of this happening. And at least two accidents and one injury have been attributed to the issue. Ford says the problem is that the steering wheel bolt that keeps the wheel attached to the column might not provide enough torque, resulting in the bolt slowly loosening and working its way off the column. The good news is that the fix is really simple. Ford will install a larger bolt with more threads along with a larger nylon patch to keep it all locked down. The fix is completely free to owners. Cars affected by the recall include 2014 to 2017 Fusions built built at the Flat Rock plant in Michigan between August 6, 2013, and February 29, 2016. Model year 2014-2018 Fusions and MKZs built at the Hermosillo factory in Mexico are also affected. So if you have one of those sedans, please get in touch with your local dealer to have the issue addressed. Related Video: