1997 Ford F350 Super Cab Dually 7.3 Diesel on 2040-cars

Auto blog

Will the new Ford GT race at Le Mans?

Ford stole the spotlight here on the floor of the Detroit Auto Show this year with the reveal of the new GT. Its carbon-fiber chassis, 600-plus-horsepower EcoBoost engine and radical aerodynamic shape made sure of that, but flanking it with the debuts of the Mustang GT350R and F-150 Raptor didn't hurt any, either. Any racing fan looking at the new Blue Oval supercar, however, had to wonder whether Dearborn is planning on putting it on the race track. The House that Hank Built is, after all, a known entity in motor racing. It may be canceling its V8 Supercars program Down Under, withdrawn its support from the World Rally Championship, and it's been years since it's competed in Formula One or Indy. But it still competes in the United SportsCar Championship, NASCAR, NHRA and a variety of motor racing disciplines. One of its most famous and celebrated of racing endeavors, however, came in the form of the original GT40 that brought Ford four consecutive victories at the 24 Hours of Le Mans, starting with a dominant one-two-three finish in 1966. It's the 50th anniversary of that landmark win which the new Ford GT celebrates, but while the press materials made clear reference to that historical event, any mention of a return as was previously speculated was carefully omitted. That, according to Autosport, could come down purely to the ACO, the organizers of the event and sanctioning body for its associated series, which has yet to announce the revised format for the GTE class under which a potential Ford GT racer would compete in 2016. Longtime Ford racing partner Multimatic is said to have closely consulted with the ACO on the formation of those rules, however, and assuming they're finally formulated to Dearborn's liking, we could be looking at a GTE-spec Ford GT to return to La Sarthe next year in celebration of that landmark victory half a century prior. Chip Ganassi Racing – which races under Chevy power in NASCAR and Indy but recently switched to Ford for its Daytona Prototype – is said to be in line to field the car on Dearborn's behalf. If given the green light, it would be the first time Ford would field a factory effort at Le Mans since the C100 project under the Group C category in the early 1980s. A racing version of the previous Ford GT was prepared by Switzerland-based Matech a few years ago, but without factory support or notable success beyond the FIA GT3 European Championship.

Ford debuts Fusion NASCAR racer that edges closer to stock [w/video]

The sixth-generation NASCAR Sprint Cup racecar, which will make its competition debut at the 2013 Daytona 500 this weekend, marks the closest thing to a "stock car" that the sport has seen in more than 20 years. No longer using just stickers to distinguish the different brands, the image above shows the lengths NASCAR and automakers went in order to create a racecar design that more closely resembles the individual cars they represent.
Ford, one of the more open and vocal OEMs regarding the Gen6 car's development, is giving us a closer look at its racing version of the Fusion with a pretty revealing side-by-side comparison with last years' racer (click above for an expanded view). Aside from the more realistic front end and production-like body lines, the overall shape, dimensions and proportions have also been designed to give the racecar a more stock appearance. Most of the new racer was designed by the Ford Design Center, which the automaker says was the first time it has been so involved in the design process since the 1960s. Of course, one area the Sprint Cup Fusion really differs from the production Fusion is its Ford Racing 5.8-liter V8 producing around 850 hp. Can you say Fusion SVT?
Scroll down for a quick video from Ford Racing showing a production Fusion morph into a Cup car.

Black Zombie electric Mustang launches Blood Shed Motors [w/videos]

As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant. Lightning repeatedly vanquished the darkness like the angriest of strobe lights and thunder shook the building, punctuating the clatter of a heavy Texas rain on the metal roof as the clock ticked away the initial seconds of a rare full moon Friday the 13th. It was then that the Black Zombie came to life for the first time. Beneath the hood of this rust-free 1968 Mustang fastback, a 289-cubic-inch V8 no longer turns gasoline into heat, noise and pollution. As patient zero of Blood Shed Motors, the classic pony car has received a powerful electric transplant, and now boasts twinned Warp 11 DC motors and a pair of fresh Zilla controllers that will serve as the basic blueprint for future vehicles. Dubbed the Zombie 222 drivetrain, the setup will be limited to 750 horsepower in customer's cars to keep the maintenance experience low, and eventually will draw power from a 40-kWh battery pack. In this first example, though, the output is bit more extreme. For one day, at least, they have the 1,500-kW-capable pack that powers the record-setting Swamp Rat 37 racer belonging to Don Garlits and a brief window of opportunity to try it out on a track. Blood Shed Motors is the result of a collaboration between NEDRA co-founder John "Plasma Boy" Wayland, the man who helped bring electric vehicle drag racing to the attention of the world with his unassuming White Zombie Datsun 1200 conversion and Austin, TX business man Mitch Medford, who've put together a small team of experts in their chosen fields. The plan is to build a limited number of muscle car conversions on pristine early Mustang, Camaro, and Barracuda platforms. The plan is to build a limited number of high-quality muscle car conversions on pristine (No restored rust buckets!) early Mustang, Camaro, and Barracuda platforms. Each can be customized according to buyer's wishes and blessed with its own serial number. The price tags will be in the eye-watering $200,000-and-up neighborhood, reflective of the cost and rarity of these cars and the custom nature of the alterations. Of course, you can't just multiply horsepower and add the monster torque that these electric motors put out and expect an antique chassis to hold up.