1995 Ford F-350 Rack Dump Truck on 2040-cars

Auto blog

Malcolm Gladwell reflects on engineering, recalls, and compromise

Journalist Malcolm Gladwell has made a career taking on big, complicated topics and humanizing them to make the unwieldy understandable. He has already done this in bestsellers like The Tipping Point and Outliers, and now he has brought the same approach to automotive recalls in a long piece for The New Yorker. The article titled The Engineer's Lament is framed around an interview with the former head of Ford's recall office about the famous Ford Pinto campaign where the position of the compact's fuel tank could cause it to explode in rear-end collisions. Plus, there are detours into Toyota's unintended acceleration cases and the General Motors ignition switch problem. While all the history is illuminating, the heart of the story comes from an examination at the thought process of engineers, and how their thinking differs from other professions. Gladwell comes off as sympathetic to auto engineers in this piece. While he admits that they often approach problems in a sterile way, the writer doesn't try point that out as a failing. It's merely a fact to be understood. The story itself is quite lengthy, but well worth a read if you have the time for an insiders view into how these recalls are assessed on the inside.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Ford spotted testing new Focus RS at the Nurburgring

Ford is expected to be launching a revised version of the Focus ST soon, but the latest snapshots from our spy photographers at the Nürburgring suggest that the Blue Oval is already working on an even more potent example: the new Focus RS.
Though the partially disguised test mule is wearing an ST badge (along with a Dewey sticker that makes us wonder what adventures Huey and Louie are up to and what manner of duck-tail rear spoiler they may be wearing), there are several tell-tale signs that something else is afoot here. There's a larger front air dam, bigger brake calipers, dual exhaust tips (instead of the central exhaust on the ST) and a reshaped wing protruding from the trailing edge of the roof.
That may all be well and fine, but what's under the hood? We don't know yet for sure, but word has it that Ford is preparing to port over the 2.3-liter turbo four offered in the new Mustang, where it packs 305 horsepower and almost as much torque - potentially retuned to produce even more for the top-of-the-line Focus, which could channel it all to the front wheels like the last model or pack an all-wheel drive system. The Global C platform on which the Focus is based does, after all, also underpin AWD models like the Ford Escape and Lincoln MKC.