Ford: F-250 Xl on 2040-cars

Auto blog

Ford doubling 1.0L EcoBoost engine production

Ford's 1.0-liter EcoBoost three-cylinder engine hasn't been around that long, but it sounds like the engine is getting to be fairly popular in the automaker's global car lineup. The Detroit News is reporting that Ford has add a second shift that will allow its German engine plant to double daily output from 500 engines to 1,000.
The increased capacity is part of a plan to sell more than 300,000 vehicles a year with this engine in Europe by 2015. Europe is currently the only market where the smallest of the EcoBoost engines is offered (including in the Focus pictured above), but US-spec Fiesta models will be getting this mill for 2014.
Three-cylinder engines are expected to continue to grow in popularity in coming years with the report indicating that global production of these engines will double by 2018 to 9.8 million units. General Motors, BMW and Mitsubishi are all expected to introduce three-cylinder engines in the near term, as well.

Formula Drift kicks off 11th season on Streets of Long Beach

The 2014 Formula Drift series kicked off last weekend in Long Beach, and saw Chris Forsberg, who you'll recall went mad and drifted around a warehouse in an Infiniti M, take the title behind the wheel of his Hankook Tire Nissan 370Z (shown above).
Forsberg really ran away with the first round of competition, outscoring his closest opponent, second-place finisher Kenneth Moen and his Bridges Racing Nissan 240SX, by 20 points. Third place was 2013 championship winner Michael Essa and his Yokohama BMW M3, 30.5 points behind Forsberg.
In the manufacturers' title, Nissan took an early lead with 122 points, which isn't a huge surprise considering five of the top ten drifters were piloting either a Z or a product of the brand's S platform. Ford, which had two drivers (Justin Pawlak and Vaughn Gittin, Jr.) in the top ten, took home second place, while BMW is currently third in the manufacturers' standings.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.