2015 Ford F250 Super Duty on 2040-cars

Auto blog

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

John Hennessey's personal 2015 HPE700 Supercharged Ford Mustang GT hits 195 mph

Dressed in a coat of menacing black paint, the 2015 Hennessey Performance HPE700 Supercharged Ford Mustang GT definitely looks like one mean muscle machine. The 717-horsepower 'Stang proved that it can back up that aggressive appearance recently when company founder John Hennessey took his personal example to see just how fast it would go. The result down the 1.1-mile straight at the Continental Tires Proving Grounds in Uvalde, Texas, was over 195 miles per hour. The Mustang is nothing but a black blur and wall of supercharger wail as it buzzes by the camera at top speed. Despite the strong result, Hennessey doesn't seem done with the 'Stang yet. The car still seems to be pulling when it hits the rev limiter, and there's some straight track left ahead. After getting out, John Hennessey immediately says he thinks 200 mph is possible. The heart of the HPE700 is a 2.9-liter Roots-Type supercharger running at 7.25 psi. That's a pretty massive blower, especially when considering the 2.4-liter unit on the Hellcat V8. The engine also gets upgrades like improved injectors, a new fuel pump, stainless steel exhaust and recalibrated management. The company claims the upgraded Mustang can hit 60 in around 3.6 seconds and do the quarter-mile in 11.2 seconds at 131 mph. Prices for the package start at $59,500, but this one would would ring up for $65,874. Hennessey Performance is limiting production to 500 of them for the 2015 model year. 2015 HPE700 Supercharged Mustang Rockets to 195.2 mph John Hennessey takes his personal Mustang GT on a Texas road trip Uvalde, Texas-Everything is bigger in Texas, especially when it comes to automotive performance. Texas also lays claim to the highest posted speed limit in America at 85 mph. Enter the team from Hennessey Performance Engineering (HPE) who are located just west of Houston. John Hennessey and his merry band of performance car builders like to go fast, so much so that they have their own 1/4 mile dragstrip next to their workshop. Recently, the Hennessey team wanted to test their 717 horsepower HPE700 Supercharged Mustang development car (John's personal car and occasional daily driver) beyond the 130+ mph speeds that they have seen on the dragstrip. "Thankfully, we had recently received an invitation from the guys at the Continental Tires proving grounds in Uvalde to come over and do some testing on their 8.0 mile high speed oval", said Hennessey.

GM, Ford and Fiat Chrysler set target date for restarting production

The parking lot stands empty at Fiat Chrysler's sprawling Belvidere, Ill., assembly plant. / Getty Images   General Motors, Ford and Fiat Chrysler Automobiles are targeting May 18 to resume some production at their U.S. factories after shutting down plants in March due to the coronavirus outbreak, the Wall Street Journal reported. Executives from the companies in recent days tentatively settled on the timeline following talks with United Auto Workers (UAW) leaders and Michigan Gov. Gretchen Whitmer's office, the Journal said on Monday, citing people familiar with the plans. The head of the UAW union last week warned it was "too soon and too risky" to reopen auto plants and Michigan's economy in early May, citing risks to workers. The companies are working with the union on drawing up safety protocols for reducing exposure risk for workers, but haven't finalized those terms yet, according to the WSJ report. GM, Ford, Fiat Chrysler and UAW did not immediately respond to Reuters requests for comment.   Plants/Manufacturing Chrysler Fiat Ford GM coronavirus