2013 Ford Super Duty F-250 Srw 4wd Crew Cab 156 Lariat Cng on 2040-cars

Auto blog

Is this the 2017 Ford F-250 and its all-new aluminum body?

We don't have much to go on, but our friends at Jalopnik have uncovered a completely undoctored photo (used with permission) of what appears to be the 2017 Ford F-250 Super Duty. There's no indication of what's under the boxy new sheetmetal – our bet, like that of Jalopnik, is that the 6.2-liter gasoline-powered V8 will join the latest torque-monster of a 6.7-liter PowerStroke V8 – but we're still left with lots of time to work out the details. For now, we see the same kind of upright and in-your-face styling that we've come to expect from the Ford Super Duty, including more chrome than a '60s Cadillac up front and huge headlight clusters that cut deeply into the side bodywork. We also note plenty of glass making up the large greenhouse, which should be a boon for visibility. Of course, the big news is the actual metal that the body is stamped from. We're expecting to see lots of aluminum, with the heavy-duty pickup following the smaller, lighter-duty F-150 into the lightweight realm for increased fuel savings and greater pulling and hauling capabilities. Stay tuned for more. Related Video: News Source: JalopnikImage Credit: Jalopnik Ford Truck Future Vehicles Off-Road Vehicles ford f-250 autoblog black

Ford, Samsung shack up to bring regen braking to non-hybrid models [w/video]

Ford must be desperate to get itself ready for the beach this summer because it is really trying to get into shape. Shortly after unveiling the Lightweight Concept that cut the weight of a Fusion down to that of a Fiesta, it's now the rest of the line's turn for improvement. The company is wrapping up a 10-year research project aimed at developing next-gen automotive batteries to improve efficiency.
Ford claims that 70 percent of its lineup will have stop/start tech by 2017. The key to this massive proliferation is its new dual-battery system that combines a lithium-ion battery with a lead-acid one and regenerative braking. The setup works by harvesting braking energy and converting it to electricity. When the vehicle stops, the engine shuts off, but the Li-ion battery has enough juice to keep the accessories running. The engine starts up again as drivers take their foot off the brake. The layout would mean less wasted gas while idling. It's already available on Ford hybrids and is somewhat similar to the i-Eloop capacitor-based system from Mazda.
The bigger challenge is tuning the regenerative braking right. While hybrid drivers may be a little more adventurous, when it comes to getting a hang of regen braking, conventional buyers might not be so open-minded. The systems have a tendency to be a little grabby at first and then taper off at very low speeds. Ford needs to make sure it's just right to avoid turning off buyers.

Fiat Panda by M-Sport a one-of-a-kind rally car

English racing and engineering firm M-Sport is probably best known for the Bentley Continental GT3 endurance racer and the Ford Fiesta R5 customer rally car. Since building the first of 294 Fiesta R5 Mk. I cars in 2013, the fleet of pint-sized competitors has won a total of more than 950 races. So when a longstanding M-Sport customer asked the company to do something special with a clapped-out, 1990s-era Fiat Panda that would retain the car's Panda-ness but also make it a stonking rally car, M-Sport decided to combine the Italian with the Anglo-American. The result is the Panda by M-Sport, a widened Panda bodyshell lowered atop a Fiesta R5 chassis and engine. Otherwise known as Panda'monium. Or Pandiesta, if you're tipsy. Just fitting the skinny Fiat over the tube-frame chassis meant widening the Panda's body shell by 14.2 inches; that slick grille is actually made of two Panda grilles to gain the required width. That surgery helps maintain the original Panda's silhouette, but more was needed to slide the Fiesta's wider track underneath. More latitudinal stretch was provided by the box-section wheel arches that, up front, flow into a front bumper that is half snowplow. In the longitudinal direction, the Pandiesta's wheelbase is 12.6 inches longer than that of the stock Panda. The Ford's 1.6-liter EcoBoost four-cylinder lives under the hood. It sends nearly 300 horsepower and 332 pound-feet of torque to four Pirelli P Zeros through a five-speed sequential transmission and two custom differentials. The new rear diffuser and single, central exhaust convey the seriousness of the endeavor. Hand-embossed lettering spells "PANDA 4x4" on the rear hatch in case anyone has questions about this having as much capability as the standard Panda 4x4. The interior is all Fiesta R5 save for the Panda-mimicking instrument panel and the co-driver's footrest. The latter is also inscribed with the word "PANDA." Despite the license plate, there's no question of street legality here, or rather illegality. M-Sport says the Panda'monium is ready to do any special stage on tarmac or gravel. Seems this is also the car that launches a new division for customer creations called MS-SV, which is M-Sport Special Vehicles. You can watch M-Sport owner Malcom Wilson take you on tour of the Panda by M-Sport in the video at top, and check out what the finished product can do on a track here.  Related Video: This content is hosted by a third party.