2013 Ford F250 Lariat Turbo Diesel Navigation Rearcam Heated Ac Seats Sync 7k on 2040-cars

Auto blog

Ford, Volvo, Google, Uber and Lyft form self-driving alliance

Five companies arguably leading the worldwide effort to develop autonomous cars said Tuesday they're forming an organization to lobby the federal government to better prepare America's roads for self-driving technology. The founding members include some of the biggest companies in the automotive, autonomous, and ride-sharing realms – Ford, Google, Lyft, Uber and Volvo. Operating as the "Self-Driving Coalition for Safer Streets," they aim to work with lawmakers and regulators to clarify a disparate set of rules and regulations at both the state and federal levels that could hinder the deployment of autonomous cars. "The U.S. risks losing its leading position due to the lack of federal guidelines for the testing and certification of autonomous vehicles." – Hakan Samuelsson David Strickland, a former administrator of the National Highway Traffic Safety Administration who issued the first set of autonomous-related policies in that role (pictured below), will serve as the group's counsel and spokesperson. "The best path for this innovation is to have one clear set of federal standards, and the Coalition will work with policymakers to find the right solutions that will facilitate the deployment of self-driving vehicles," he said in a written statement. In January, Transportation Secretary Anthony Foxx said his department would accelerate efforts to craft such federal standards. Those efforts include holding two public hearings on standards, the second of which is scheduled to be held Wednesday in Palo Alto, California. Foxx signaled the intent to deliver them by June. Google has been leading the efforts to ensure such standards are national in scope, warning their cars could run afoul of state-specific laws should they cross state borders or if standards varies between the federal efforts and regional ones. The complexity of such efforts was underscored recently, when NHTSA agreed that Google's software could be considered the driver of a vehicle for the purpose of meeting federal motor vehicle standards, an interpretation that would conflict with preliminary California rules that mandate a licensed driver operate a self-driving car that comes equipped with human controls like a steering wheel and brakes. At South By Southwest last month, Jennifer Haroon, Google's self-driving car business leader, said the company couldn't accomplish its goals under those regulations.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.