2007 Ford F-250 Super Duty Xl Standard Cab Pickup 2-door 5.4l on 2040-cars

Auto blog

2016 Ford Focus RS leaked ahead of official debut

We won't officially see the new Ford Focus RS until the Blue Oval shows it to the world at an event on Tuesday, but here it is ahead of time, courtesy of the folks at Evo. As you can see, this is one hot little hatch, and if Evo's story is to be believed, those aggressive looks will be backed up with some pretty serious performance. Power is said to come from Ford's 2.3-liter EcoBoost inline four-cylinder engine, though the magazine's estimate of 250 horsepower seems awfully conservative to us (considering that's less than the current Focus ST). If earlier reports are to be believed, we think the RS will come packing more like 300 hp, if not more. For the first time, the Focus RS will use all-wheel drive with brake-operated torque-vectoring, and Evo says that up to 70 percent of the engine's power can be sent to the rear wheels. Hitting 60 miles per hour will reportedly take less than five seconds. Otherwise, it's business as usual, with a mean-looking exterior complete with the necessary aero bits (notice that wing!), and inside, we can see a beefy set of Recaro chairs. That's really all we know for now, but stay tuned for more when the Focus RS makes its official debut in the not-too-distant future. Related Video:

Your official Ford Transit specs are here, $29,565* to start

Ford has released the full list of pricing and specs on its new Transit, the replacement for the long-lived E-Series cargo van. Prices are set to start at $29,565 and can increase rapidly from there, depending on length, engine and wheelbase, among other options.
Let's talk first about those new engines. The base is the familiar 3.7-liter, naturally aspirated V6. It boasts 275 horsepower and 260 pound-feet of torque and can return up to 14 miles per gallon in the city and 19 mpg on the highway. This engine can also be adapted to run on LPG or compressed natural gas. Of course, there are better alternatives, for a price, the first of which is Ford's well-received, 3.5-liter EcoBoost V6. It packs 310 hp and a best-in-class 400 lb-ft of torque (available at just 2,500 rpm) while matching the naturally aspirated engine in both city and highway fuel economy.
Then, there's the diesel. With a 3.2-liter, five-cylinder diesel mill at its disposal, the Transit generates 350 lb-ft between 1,500 and 2,500 rpm, along with 185 hp. This engine hasn't been rated by the EPA, although we'd be really, really surprised if it didn't handily best either of the gas-powered engines in fuel efficiency. A six-speed automatic is standard, regardless of engine.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: