1985 Ford F-250 - 460 Cobra Jet (560 Hp/525 Ft.lb V8 Frame Restored on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Amelia Island 2013: 50 years of the Ferrari-slaying Ford GT40

Originally developed with the sole purpose of being a Ferrari rival to compete at the 24 Hours of Le Mans, the Ford GT40 became a prominent racing machine in the 1960s in both Europe and the US. Not wanting to leave such an important car out of the fun, the 2013 Amelia Island Concours d'Elegance also took time out from its other celebrations to recognize the 50-year anniversary of the GT40.
Over its short lifespan, the GT40 was offered in a handful of configurations, but the classic short-tailed (Mk I and Mk II) bodystyles were well represented... especially in Gulf livery. James Glickenhaus (of Ferrari P4/5 fame) had his bright yellow Mk IV in the field, and there were several others in this bodystyle, including one that has seen plenty of time on the track judging by its chipped-up nose.
As a fitting statement for the car's lengthy racing history, GT40 Chassis Number 1075 won this year's Concours de Sport award. This car took home the checkered flag at Le Mans in 1968 and 1969, and racked up a total of six wins in just 11 races.

Trucks, SUVs drive U.S. October new vehicle sales

DETROIT — Major automakers posted mixed U.S. new vehicle sales in October on Wednesday, though America's love affair with high-margin pickup trucks and SUVs remained in full bloom as larger, pricier vehicles fared better than passenger cars. Auto industry publication WardsAuto put the seasonally-adjusted annualized rate (SAAR) for light vehicle sales in October at a robust level of 18 million units. But after a long boom cycle, carmakers are still ill-prepared for the slight decline in sales anticipated for full-year 2017 and have taken too few steps to trim production, said Doug Mehl, a partner in consultancy A.T. Kearney's automotive practice. "When you make a new vehicle, you have volume assumptions tagged to it, and who wants to be the guy who says, 'I'm going to make less of this really cool model'?" Mehl said. "But eventually the market is the reality, and it's going to force companies one way or other here." General Motors GM reported a sales drop of 2.2 percent for the month, with consumer sales down 6.6 percent. But sales of high-margin pickup trucks, sport utility vehicles and crossovers all rose. GM also cut its inventory of unsold vehicles — a source of concern for the market — slightly. The automaker has worked to reduce its volume of excess inventory, including through significant production shutdowns in the third quarter. GM had said its inventory would rise in October. "We are heading into the fourth quarter with good momentum, thanks to a strong U.S. economy and very strong pickup and crossover sales," said Kurt McNeil, GM vice president for U.S. sales operations. GM slightly reduced consumer discounts as a percentage of average transaction prices to 13.5 percent, from 13.7 percent in the third quarter. Industry experts believe consumer discounts above 10 percent of the average transaction price are unhealthy as they erode resale values and are unsustainable in the long term. Consultants J.D. Power and LMC said last week that based on preliminary October sales numbers, discounts have exceeded 10 percent in 15 of the past 16 months. Ford The U.S. auto industry posted record sales of 17.55 million vehicles in 2016. New sales received a strong boost in September as consumers replaced vehicles damaged in southeast Texas by Hurricane Harvey the previous month. Full-year 2017 sales are expected to be slightly lower than 2016.