Ford F150 Lariat on 2040-cars

Auto blog

These horribly misguided front-drive design studies nearly became the Mustang

As we eagerly await the unveiling of the all-new sixth-generation Mustang, Ford has been giving us some great information over the past few months showing what has gone into shaping its venerable pony car. As many changes as the Mustang has gone through in its 50 years, though, it appears the fourth-gen model played a decisive and pivotal role in the car's future.
As is part of Mustang lore, the front-wheel drive Ford Probe was originally developed as a next-generation Mustang in the Eighties before cooler heads prevailed. The Blue Oval has just released a handful of images showing how bad things could have been - including a full-scale clay model of a front-wheel-drive Mustang (shown above). Fortunately, the FWD Mustang plan was scrapped and Ford went to work designing a rear-wheel-drive replacement for the Fox Body Mustang, with three design studies making it far enough to become full-scale models. These include the soft "Bruce Jenner" Mustang, the over-the-top "Rambo" Mustang and the middle-ground "Arnold Schwarzenegger" Mustang, which finally became the basis for the 1994 'Stang.
By early 1991, the design language of the fourth-generation Mustang had been worked out, and the rest, they say, is history. Scroll down for the fascinating press release telling the story of the fourth-gen Mustang, and be sure to check out the gallery of horribly misguided sketches and various design studies that were all on the table in the late 1980s.

Ford recalling 12,300 2015 F-150 pickups

Ford is recalling 12,300 of its new 2015 F-150 pickup trucks in North America. According to the automaker, an upper l-shaft may have been riveted improperly on these trucks, which can cause it to separate. If that happens, drivers may lose steering control without warning. Yikes. The affected trucks were built at Ford's Kansas City Assembly Plant between March 21 and 25, as well as the Dearborn Truck Plant between March 21 and 30. There are 12,328 total trucks included in this recall – 8,963 in the United States, 3,348 in Canada, and 17 in Mexico. Only 5,606 of the trucks are in customers' hands, the rest have yet to be sold. Ford is not aware of any accidents or injuries related to this problem, but knows of one incident where steering control was lost, and believes it to be related to this issue. Scroll down for Ford's official statement. Related Video: FORD ISSUES SAFETY RECALL FOR CERTAIN 2015 FORD F-150 VEHICLES IN NORTH AMERICA FOR UPPER I-SHAFT RIVET ISSUE Ford Motor Company is issuing a safety recall for approximately 12,300 2015-model Ford F-150 vehicles in North America for an upper I-shaft that might have been riveted improperly, potentially causing it to separate. If that happens, it could result in the loss of steering control without warning, increasing the risk of a crash. Ford is not aware of any accidents or injuries, but is aware of one report of loss of steering believed to be related to this condition. Affected vehicles include certain 2015 F-150 vehicles built at Kansas City Assembly Plant from March 19, 2015 to March 21, 2015 and certain 2015 F-150 vehicles built at Dearborn Truck Plant from March 21, 2015 to March 30, 2015. There are 12,328 vehicles that might be affected in North America, including 8,963 in the United States and federalized territories, 3,348 in Canada and 17 in Mexico. Of those, 6,722 vehicles are unsold, meaning 5,606 vehicles are in customer's hands. Dealers will inspect the upper I-shaft assembly and replace it if necessary at no cost to the customer.

Ford launches mobile coronavirus test program with partners

For its latest coronavirus act, Ford has joined forces with a Detroit university, its affiliated physicians group and an Arab-American human services nonprofit to launch a mobile Covid-19 testing program for symptomatic first responders, health care workers and corrections officers in Michigan. Since Monday, Ford has been supplying Lincoln Navigators and drivers from the Lincoln Personal Driver pilot service, both offered through its Ford X in-house incubator. They’re equipped with tents, sanitation, power and Wi-Fi. Partners Wayne State University, the Wayne State University Physician Group and Dearborn-based ACCESS are providing staff and medical kits. The program is billed as an extension of drive-through testing sites operating in Detroit and Dearborn, but capable instead of bringing testing to locations and people who lack access to it. The mobile Navigator test vehicles will be capable of testing up to 100 people per day at no cost, with results returned within 24 to 36 hours. Testing will start at sites in southeast Michigan and then branch out to other parts of the state, including Battle Creek, Lansing and Grand Rapids. Michigan has been a major epicenter of the coronavirus outbreak in the U.S., with 27,001 confirmed cases and 1,768 deaths as of the most current data from Tuesday. The state has been under a stay-at-home order since March 23. With its factories remaining temporarily idled for vehicle production, Ford has kept busy branching out into the fight against the novel coronavirus on multiple fronts. It kicked off production of a waist-mounted, powered air-purifying respirator it designed with 3M on Tuesday, and it plans to begin building ventilators at a plant in Michigan next week. Earlier this week, Ford announced it was helping a supplier that makes airbags use the material instead for reusable medical gowns for health care workers. Employees are also manufacturing protective face masks at its Van Dyke Transmission Plant, plastic face shields at a subsidiary near Detroit and helping a medical device company ramp up production of Covid-19 field testing kits. Related Video:     Ford Lincoln SUV