2015 Ford F-150 on 2040-cars

Auto blog

Ford GT, Buick Avenir and Audi Q7 take 2015 EyesOn Design awards

The annual EyesOn Design Awards at the Detroit Auto Show allows some of the greatest designers in the world to weigh in on the best production and concept debuts at the big event each year. For 2015, the large panel of judges included luminaries like Frank Stephenson of McLaren, Ralph Gilles from FCA and Moray Callum of Ford. Apparently the editors at Autoblog had a good eye because the winner of 2015's Best Designed Production Vehicle award went to the Ford GT, which was also our favorite debut from the show. The new supercar beat the Acura NSX and Mercedes-Benz GLE-Class Coupe for the honor. The judges described the Blue Oval's shape as "capturing the original GT40 in a modern interpretation," according to EyesOn Design. The Buick Avenir was also a big winner in the awards this year and received the nods for both Best Designed Concept Vehicle and Innovative Use of Color, Graphics and Materials. In the concept category, it beat out the Chevrolet Bolt and Mercedes-Benz F 015, and in the latter group, the sedan triumphed over Audi Q7, Mercedes F 015 and Volkswagen Cross Coupe GTE. The Q7 received its own accolade for Best Designed Interior, and it beat the Avenir and Infiniti Q60 for the honor. This year's Lifetime Design Achievement Award went to former Renault designer Patrick le Quement, and Bob Lutz received the EyesOn Design Catalyst Award for the second time. The honor is for an executive "who has empowered great design," according to the organization, which describes Lutz perfectly. Scroll down to read the announcement with more comments about the winners. Related Video: Ford, Buick, Audi recipients of EyesOn Design Awards at North American International Auto Show EyesOn Design Awards for Design Excellence for 2015 were revealed today at the North American International Auto Show. The awards honor the most significant automotive designs revealed at NAIAS as determined by the North American and global leaders of design from automotive manufacturers, along with academic chairs of transportation design programs and design leaders from other fields.

Ford recalls more than 550,000 trucks and SUVs for various safety issues

Ford announced safety recalls for its current F-150 pickup along with several Ford and Lincoln crossovers early Wednesday. The recalls cover more than 550,000 vehicles and address various safety defects, ranging from a fire hazard to potential loss of braking power.  The most far-reaching of the recalls covers approximately 550,000 examples of the 2015-2018 Ford Edge and 2016-2018 Lincoln MKX, which may have been assembled with defective front brake jounce hoses (also commonly referred to as "flex lines"). These hoses run from fixed points on the chassis to the individual front brake calipers. Defective hoses could potentially rupture, allowing brake fluid to leak and resulting in a loss of braking function. Ford will replace the components in question with revised parts.  The next-largest recall is for roughly 3,000 2020 Lincoln Corsair crossovers. The affected models may have been assembled without proper clearance between their rear suspension springs and toe link brackets. The components could potentially make contact, wearing down the protective coating on the rear coil springs, allowing corrosion to occur over time. This corrosion could eventually lead to a failure of the spring. If this happens while the vehicle is being driven, it could result in a sudden change to the vehicle's handling characteristics, and the spring fragments could potentially cause further damage to the car or surrounding traffic.  Ford says owners will be notified that their Corsairs need to be inspected; if there is not adequate clearance between the rear suspension components, Ford's service technicians will remove material from the toe link bracket to allow for operation without contact.  The final (and by far the smallest) recall is for the 2020 F-150. Some units may have left the factory with the incorrect retention nut on the hot lead to the starter motor. Ford says it can cause increased heat generation or electrical arcing, which could potentially result in a fire. Ford says this issue is limited to just a few hundred examples sold in the United States. Dealers will inspect the vehicles and replace the nut if necessary.       

NHTSA investigating 725k Ford, Mercury vehicles for stalling issue

Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.