2014 Ford F150 Xl on 2040-cars

Auto blog

Ford Fiesta RS with 250 horsepower mooted

We know Ford is unveiling a new Focus RS on February 3, and it's heavily rumored to arrive brandishing an all-wheel-drive powertrain and as much as 350 horsepower. The folks at Ford Performance have also promised they are working on at least 12 models through 2020, and that still leaves a lot of time to get additional exciting vehicles out the door. One of those could be an RS version of the Fiesta, according to Evo. An RS take on the latest Fiesta would obviously need substantial boosts in both power and handling ability to warrant the work over the current top Fiesta ST (pictured above), which is already one of our favorite cars. Evo speculates that the 1.6-liter turbocharged four-cylinder could be tuned further, possibly up to about 250 horsepower, and the high-performance hatch might even take some inspiration from the Fiesta WRC rally car with an all-wheel drive system. An unnamed Ford spokesperson remained cagey about the chances for the pint-sized hot hatch to Evo, though. "We can't say anything at this moment, but we have promised to produce 12 performance models in the coming years. We'll leave it for you to decide whether that includes a Fiesta at this moment," the source said to the magazine. Evo doesn't expect a launch across the pond until at least 2017, if it actually happens. Of course, there's the lingering question of whether such a niche project would work in the US. In Europe, the Fiesta RS would challenge similarly diminutive speedsters like the Volkswagen Polo R and Audi S1, but true competitors of an equivalent size here would be much more scarce. In fact with 250 hp, the hotter Fiesta could provide unwelcome competition within Blue Oval showrooms for the Focus ST. Featured Gallery 2014 Ford Fiesta ST View 47 Photos News Source: EvoImage Credit: Ford Ford Hatchback Performance ford performance ford fiesta rs

Lincoln Nautilus, Ford Edge latest prediction: Production ends in July 2024

In June, Auto Forecast Solutions put out a report compiled by its vice president of global forecasting, Sam Fiorani. One item in the report covered how Fiorani had heard from "multiple sources" that Ford shut down the program to replace the Edge crossover in 2023. Assuming this came to pass, with the Lincoln Nautilus based on the Edge, the inference is that the Nautilus would retire at or around the same time. Ford's response to media queries about the report was either "No comment" or PR-speak deflection. Lincoln's statement on the matter to Motor1, a crafty non-answer, was, "The Nautilus plays and will continue to play an important role in Lincoln’s growing SUV portfolio which includes the Corsair, Aviator and Navigator. Lincoln is investing in growth segments like SUVs and we have no plans to exit the segment." It's possible Lincoln has no plans to leave the segment, but the Nautilus might, according to a fresh, unsourced report in Ford Authority. The site claims the Nautilus will end production at the Oakville Assembly Plant in Ontario, Canada, in July 2024.  Again, we can't know how much, if any of this, is true. But we're zeroing in on a timeline for the potential end of the Edge and Nautilus in the U.S. Those are the only two products Oakville currently builds, and when the Canadian union Unifor asked Ford about the reports in June, Ford couldn't offer union reps anything concrete or reassuring. The Detroit News quoted Unifor chief Jerry Dias as saying of the automaker, "There is no question, they are going through a major evaluation of their portfolio, based on a whole host of things."   We could be seeing one of the earlier theories for Edge's potential demise coming true. Some analysts suspect Ford could be pruning its crossover lineup because it has too many similarly-sized offerings at the moment, the Edge hasn't met its sales targets in Europe, and more compact crossovers are on the way that could bring better street cred if they're associated with the Bronco or Bronco Sport. Unifor and Ford are now in negotiations over a new contract, so it's possible we'll get more clarity in the next month or so about Ford's plans and what will come of Oakville and its roughly 4,000 workers. If Ford walks away from the assembly plant, it will only have two engine plants left in Canada, and no vehicle assembly north of the border for the first time in about a century.

Report: GM struggling to market turbo technology

In the automotive realm, marketing can sometimes prove just as important as the actual product. Take, for instance, Ford's well regarded EcoBoost technology, which couples turbocharging with direct injection to produce more horsepower and reduce fuel consumption. Would it surprise you to hear that General Motors has had similar technology on the market for over three years?
It's true. GM's first turbocharged, direct injected powerplants hit the market for the 2007 model. The 2.0-liter Ecotec mills put down an impressive 260 horsepower and a matching 260 pound-feet of torque, and they were lauded by the press in the engine bays of the Pontiac Solstice, Saturn Sky, Chevrolet Cobalt SS and Chevrolet HHR SS. But few people outside a core group of enthusiasts actually remember this fact.
Says Uwe Grebe, executive director of GM's global advanced engineering, "We didn't have a badge and say, 'This is the most important thing we will put on all our brochures.'" Ford, however, did just that, and it's EcoBoost engines are right at the tips of all our tongues when we discuss today's most advanced powerplants. So, how does The General fix its mistake?