2014 Ford F150 King Ranch on 2040-cars

Auto blog

Ford talking unibody Ranger replacement

Now here's some welcome news. Car and Driver reports Ford is seriously mulling a replacement for the recently deceased Ranger, but the successor to the compact pickup's throne may not look anything like what we've seen from the nameplate in the past.
While speaking at the 2013 Chicago Auto Show, Doug Scott, marketing manager for Ford Trucks, said there's still a market for a smaller pickup, but that buyers expect to see a larger differentiation between the smaller utility vehicles and their full size counterparts in price, capability and fuel economy.
According to Scott, that means a vehicle with a payload capacity of around 1,000 pounds paired with a towing capacity of 3,000 pounds and "a dramatic reduction in fuel consumption." But the biggest piece of that recipe is the price tag, and Scott says to keep the MSRP far enough away from the already cheap F-150, the answer could come in the form of a unibody design. Scott says target customers in this market don't care whether the truck has a traditional frame or not, so long as it's tough enough to do the job and has the capability they need.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford builds two-millionth EcoBoost engine

Ford's EcoBoost engine lineup is only four years old, but it is growing into an important and popular global engine. As proof of its popularity, Ford just produced its 2 millionth EcoBoost engine - a 2.0-liter inline four-cylinder - which rolled off the assembly line in Louisville, Kentucky under the hood of an Escape.
Ford now offers five EcoBoost engines around the world ranging from the 1.0-liter inline-three to the twin-turbo 3.5-liter V6, and the automaker is expanding production of two of its engine lines to keep up with demand. Earlier this year, Ford announced that the 2.0-liter EcoBoost would be built in Cleveland, Ohio starting in 2014 and, more recently, Ford said that it will be doubling production of the 1.0-liter EcoBoost in Germany. That turbo-three will also be produced in China at a new Ford engine plant in Chongqing.
Scroll down for Ford's full press release on this EcoBoost production milestone, including a breakdown of where all the engines were made.