2014 Ford F150 on 2040-cars

Auto blog

Ford F-150, Mustang, Explorer, Bronco and Lincoln Aviator recalled for rollaway fears

Ford is recalling certain F-150, Mustang, Explorer, Bronco, and Lincoln Aviator models from the 2022 and 2023 model years equipped with automatic transmissions. According to documents posted by the National Highway Traffic Safety Administration, Ford's 10R80 transmission may contain a loose bolt — literally an extra bolt loose inside the transmission, not a bolt that isn't tightened — that could prevent the transmission from engaging in Park. This could happen even if the gear shifter position indicates that the vehicle has been shifted to "Park." As Ford's recall acknowledgement says, "The inability to secure the vehicle in the park position can result in a rollaway, increasing the risk of a crash or injury." Dealers will replace the transmissions of vehicles affected by this defect. Note a similar-sounding recall was announced in 2022, but it was for entirely different models with entirely different transmissions. A relatively small number of units — 944 to be exact, or 4% of production — are thought to be affected by this issue, but they weren't built in successive order, meaning their VINs need to be verified by Ford. Customers are advised to contact Ford customer service at 1-866-436-7332 and reference Ford's internal recall number 23S06. Because some vehicles affected by this recall could be on dealer lots, Ford sent a note to its network of dealerships advising them not to sell or demonstrate the models included in this recall, potentially until the second quarter of 2023 when Ford expects "that parts ordering information and repair instructions will be available to support this safety recall." Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2023 Ford Bronco Heritage Edition walkaround

Ford Focus RS ready to make our hot hatch dreams real

Ford's current hot hatch siblings the Fiesta ST and Focus ST are already two pretty great entries into the segment, but there's always a desire for a little more. Thankfully, it looks like the Blue Oval is ready to satiate that need because it's continuing to test the even more powerful Focus RS around Europe. According to our spy shooters, these shots come from near the Nürburgring.
As with previous photos, Ford engineers continue to heavily camouflage the front end of the RS prototypes, but there's a big difference here. Unlike earlier ones, this example appears to have a closer-to-production-ready front bumper rather than just a horizontal strip for the license plate. That may point to development getting somewhat closer to wrapping up. Although, this one lacks the larger rear wing from prior testers, and the exhaust also appears to be a work in progress with the rear diffuser covered in mesh in these latest shots.
The RS is rumored to be using the 2.3-liter turbocharged four-cylinder from the 2015 Mustang, but power is reportedly turned up from 310 horsepower in the 'Stang to somewhere between 325 hp and 350 hp for the Focus. Routing all that just through the front wheels could be a recipe for serious torque steer, and all-wheel drive is potentially being used for better traction.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.