2014 Ford F150 on 2040-cars

Auto blog

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

How Ford secretly used customers to test its aluminum F-150 [w/video]

Automakers getting clever about disguising development vehicles isn't anything new. Between mules wearing the sheetmetal of other cars and prototypes decked out in as much camouflage as is practical, automakers know how to make it very difficult for the general public to get an exact idea of what kind of vehicle is in development. Ford, though, is rapidly becoming the master.
We knew that the Blue Oval originally tested the durability of the aluminum construction being used for the 2015 F-150 by building an all-aluminum 2014 truck and entering it in the Baja 1000 off-road race. That's no longer a secret. What we didn't know, though, is that the aluminum development dates back to before even that, and that some of the people in question had no idea what it was they were working with.
Ford says this is the first time prototypes have ever been handed over to the public.

2015 Hennessey Ford Mustang hits 207.9 mph

After hitting over 195 miles per hour a few months ago, John Hennessey was barely out of his personal HPE700 Mustang before he said that 200 mph was achievable. Don't doubt a man who knows a ton about taking cars to insane speeds. With the new HPE750 Mustang, he and his customers can finally surpass the 200-mph mark in their cars. "If at first you don't succeed, just add more horsepower and rpm and try again," Hennessey said in the company's announcement. Rather than the 717 horsepower and 632 pound-feet of torque from the supercharged 5.0-liter V8 in the HPE700, the HPE750 ratchets the same powertrain up to an even more potent 774 hp and 648 lb-ft. In a real show of confidence, the Hennessey team brought along Jay Leno when it returned to the Continental Tire Proving Grounds in Uvalde, TX, to set a new top speed with the HPE750. The upgrades to the Mustang definitely paid off because the pony car reached a GPS-verified 207.9 miles per hour down the straight. The run will eventually appear on a segment on the upcoming Jay Leno's Garage TV show that will air CNBC. Prices for the HPE750 start at $59,500 USD, including the base 2015 Mustang GT, but building an exact replica of this one would cost $69,374, according to Hennessey. In addition to the huge top speed, the company claims that the coupe can reach 60 mph in 3.4 seconds and cover the quarter mile in 10.9 seconds. 774 HP Hennessey Mustang Tested to 207.9 mph Jay Leno visits Texas tuner for upcoming TV series on CNBC June 2, 2015 Uvalde, Texas—On Wednesday, May 27, 2015, professional driver, Brian Smith, drove the Hennessey HPE750 Supercharged Mustang to a top speed of 207.9 mph. In the process, Hennessey's potent pony car became the first 2015 Mustang to break the 200 mph mark. Jay Leno was on hand to witness the record speed while filming an upcoming episode of Jay Leno's Garage, which will air on CNBC later this year. The run was made on the 8.5 mile high speed oval at the Continental Tire Proving Grounds located in Uvalde, Texas – the same test track where John Hennessey test drove the company's HPE700 Mustang to a top speed of 195 mph back in February of this year. During both tests, speeds were validated with Racelogic's VBox 3i GPS data logging system. "If at first you don't succeed, just add more horsepower and rpm and try again," said company founder and president, John Hennessey.