2011 Ford F150 Lariat on 2040-cars

Auto blog

Ford hurt by 2015 F-150 production restraints

The new 2015 Ford F-150 came out of the gate strong for January 2015 with all F-Series sales up 17 percent for the month. However, February tempered those gains a bit with the model line dipping 1.2 percent, and the Ford brand itself dropped 1.7 percent year-over-year. The fall is being blamed in part on tight supply of the latest pickup. A major factor holding back the 2015 F-150 is that they are only currently being made at the Dearborn Truck Plant. The Kansas City factory is still changing over, and full supply from them both is expected by the middle of the year. Ford also just announced plans to hire an extra 1,550 people to build the pickups, including 900 in Kansas City. However, the downtime in the assembly changeover has caused about 90,000 units in lost production since mid-2014, according to The Detroit Free Press. It's not all bad news for the pickup, though. The latest F-150 made up 21 percent of F-Series sales in February, according to The Detroit Free Press, up from 18 percent in the previous month, and they remained on dealer lots an average of 18 days. The lessened supply has also meant lower incentives. Mark LaNeve, Ford's US marketing boss, told the Free Press that average F-150 transaction prices were up $2,000 from last year. He also indicated that retail figures grew seven percent in February, while F-Series fleet numbers were down 18 percent. The constrained supply does come at an inopportune time for Ford, though. This year is expected to be huge for pickups. Also, lower gas prices appear to be pushing people towards SUVs and trucks recently. Related Video:

Ford, Alcoa announce next generation of aluminum lightweighting for F-150

Ford likes what it has seen with the use of aluminum in its world-beating F-150 pickup trucks. Now, the Blue Oval is working with Alcoa to use that company's Micromill material to increase the amount of aluminum in Ford vehicles. In fact, Ford will start using Micromill on 2016 model-year F-150s later this year, and will double the material's use in 2017. The purpose, as you might suspect, is light weighting, which allows Ford to boost towing capacity while adding as little weight as possible. Ford will be the first automaker to use Micromill, and will use it in both structural components and exterior panels. Micromill's rolling-mill system cuts the time it takes to turn molten metal into coil to 20 minutes from about 20 days. Already, Ford has had positive results by using aluminum on its leading pickup truck model. In April, it was announced that the 2015 Ford F-150 achieved a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing. Safety features like inflatable seat belts, adaptive steering columns and a forward collision warning system helped matters. General Motors may have taken note of those results, even after running an ad campaign touting its continued use of steel over aluminum. Last month, GM said it would sink $877 million into its Flint, MI, truck factory. Reuters said much of the expense was to convert many of the bodies for models like the Chevrolet Silverado and GMC Sierra pickups into aluminum. You can take a look at Ford's press release below. Ford Motor Company and Alcoa Inc. are collaborating to produce next-generation automotive aluminum alloys that are more formable and design-friendly. Ford will use Alcoa's Micromill® material in multiple components on the 2016 F-150 – becoming the first automaker to use the advanced automotive aluminum commercially. The companies entered into a joint development agreement to collaborate on next-generation aluminum alloys for automotive parts using Micromill™ technology. ''Light-weighting enables us to design vehicles with great customer attributes – like the F-150, which can tow more, haul more, accelerate quicker and stop faster than the previous F-150, and is more fuel-efficient than ever," said Raj Nair, Ford group vice president and chief technical officer, Global Product Development.

Ford To Unveil Solar Hybrid Concept Car At CES

Ford plans to unveil at this month's International CES gadget show a solar-powered concept car that offers the same performance as a plug-in hybrid but without the need for a plug. The C-Max Solar Energi Concept car uses a gasoline engine combined with a gizmo that acts like a magnifying glass to concentrate the sun's rays on the vehicle's roof-mounted solar panels. The automaker says the vehicle's estimated combined city-highway mileage is 100 miles (160 kilometers) per gallon. The U.S. auto maker says that by using solar power instead of an electric plug, a typical owner will reduce their annual greenhouse gas emissions by four metric tons. The company says it sold about 85,000 hybrid or electric vehicles in 2013, including 6,300 units of its C-Max Energi plug-in hybrid. The sun-ray concentrator was developed by researchers at the Georgia Institute of Technology and uses what is known as a Fresnel lens, which concentrates light but can be made thinner than a conventional lens. A full day of sunshine is equivalent to a four-hour battery charge, or 8 kilowatts, Ford says. On a full charge, it should have a range of 620 miles (997 kilometers), the same as the C-Max Energi. The concept car also comes with a plug-in port for standard electric charging. Ford says that 75 percent of all trips made by an average driver could be powered by the sun. After showing off the concept car at the convention in Las Vegas Jan. 7-10, Ford Motor Co. says that it will test the vehicle with institute researchers to determine if it's feasible for mass production. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Gallery 2013 Ford C-Max Energi Test Drive View 9 Photos Green CES Ford Alternative Fuels Fuel Efficiency Solar Cars solar car