2010 White Xlt 4.6l V8 2wd Curt Trailer Hitch Power Options Sirius Bluetooth on 2040-cars

Auto blog

Inside Ford's high-tech climate chamber

There are two ways an automaker can test its vehicles in extreme climates: it can send said vehicle around the world – from Death Valley to the Arctic Circle – in search of the harshest weather, or it can recreate those conditions in an enclosed environment. We're sure that many automakers undertake some combination of both, but in this latest video clip, Ford shows us around inside it's state-of-the-art climate chamber. At its Driveability Test Facility in Allen Park, MI – inaugurated in 2010 just across the street from the Roush Technology Center – Ford can simulate all sorts of extreme conditions. It can drop the temperature down to -40 degrees Fahrenheit or raise it up to 130, and take it up to a simulated 12,000 feet above sea level or drop it down to 280 feet below. blast it with 150-mile-per-hour winds. It can control the level of humidity, approximate the intensity of the sun and even blast the test vehicle with artificial snow, just like your favorite ski resort. The facility strikes us as an engineering feat as impressive as some of the vehicles it's used to test, but don't take our word for it – scope it out for yourself in this brief two-minute video clip, which even includes some helpful tips for winter driving this holiday season and beyond. News Source: Ford via YouTube Plants/Manufacturing Ford Videos Michigan winter

Ford recalls more than 550,000 trucks and SUVs for various safety issues

Ford announced safety recalls for its current F-150 pickup along with several Ford and Lincoln crossovers early Wednesday. The recalls cover more than 550,000 vehicles and address various safety defects, ranging from a fire hazard to potential loss of braking power.  The most far-reaching of the recalls covers approximately 550,000 examples of the 2015-2018 Ford Edge and 2016-2018 Lincoln MKX, which may have been assembled with defective front brake jounce hoses (also commonly referred to as "flex lines"). These hoses run from fixed points on the chassis to the individual front brake calipers. Defective hoses could potentially rupture, allowing brake fluid to leak and resulting in a loss of braking function. Ford will replace the components in question with revised parts.  The next-largest recall is for roughly 3,000 2020 Lincoln Corsair crossovers. The affected models may have been assembled without proper clearance between their rear suspension springs and toe link brackets. The components could potentially make contact, wearing down the protective coating on the rear coil springs, allowing corrosion to occur over time. This corrosion could eventually lead to a failure of the spring. If this happens while the vehicle is being driven, it could result in a sudden change to the vehicle's handling characteristics, and the spring fragments could potentially cause further damage to the car or surrounding traffic.  Ford says owners will be notified that their Corsairs need to be inspected; if there is not adequate clearance between the rear suspension components, Ford's service technicians will remove material from the toe link bracket to allow for operation without contact.  The final (and by far the smallest) recall is for the 2020 F-150. Some units may have left the factory with the incorrect retention nut on the hot lead to the starter motor. Ford says it can cause increased heat generation or electrical arcing, which could potentially result in a fire. Ford says this issue is limited to just a few hundred examples sold in the United States. Dealers will inspect the vehicles and replace the nut if necessary.       

Ford invests $682 million in Edge-producing Canadian facility

Ford announced that it's investing $682 million in its Oakville assembly plant in Ontario, Canada, to make it a global manufacturing plant, which the automaker also says secures 2,800 jobs there. Including this injection of cash, Ford has invested over $2 billion in Canada in the last decade, starting with nearly $1 billion for Oakville in 2004, and over $570 million for its Essex Engine Plant in 2010.
The move to make Oakville a global manufacturer of Ford vehicles means, "If consumers suddenly shift their buying habits, we can seamlessly change our production mix without having to idle a plant," says Joe Hinrichs, Ford's president of the Americas.
Ford says that the latest investment will help it meet North American demand for the Oakville-produced Edge crossover, which is on track this year to beat 2007's US sales record of 130,000 Edges. The Ford Flex and Lincoln MKX and MKT are also manufactured at the plant.