2009 Ford F150 Platinum Crew Lifted 4x4 Sunroof Nav 8k Texas Direct Auto on 2040-cars

Auto blog

Watch Piquet and Mansell bend some sheetmetal in Ford Fusion GP

As we told you about before, there were four episodes planned for the Ford Fusion GP campaign in Brazil, and the whole series has now run its course. The Ford ads pit Brazilian Formula One driver Nelson Piquet against English F1 pilot Nigel Mansell driving the new Fusion, the two coming together again after their partnership at the Williams F1 team ended in a miserable state more than 20 years ago.
They're lined up for you below, in reverse chronological order. You should watch number three first, though, as it adds a bit more spice to the NASCAR action in the fourth.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford upgrade kit takes Focus ST to 275 hp and 296 lb-ft

If you drive a 2015 Ford Focus ST but are already jealous of the 345-horsepower 2016 Focus RS that's on the horizon, Ford Performance has a new upgrade kit that could be a great compromise. Developed by the Blue Oval experts at Mountune, the MP275 setup takes the hot hatch's output to 275 hp and 296 pound-feet of torque when running on 93-octane fuel. Those are gains of 23 hp and 26 lb-ft, respectively. Providing much of the kit's extra oomph is a recalibrated ECU with more aggressive engine mapping. The company claims that the upgrade also improves throttle response, and it keeps the Focus ST 50-state emissions legal. In addition, customers get a Mountune high-flow intercooler, a new air intake, and all of the necessary hardware to mount the components in the engine bay. For those concerned about reliability, when an authorized Ford Performance technician installs the parts, the Focus maintains the factory warranty. The MP275 kit currently retails for $1,900 on the Ford Performance website. For added protection during harsh weather, customers can also get an end cap for the cone air filter for $15. Related Video: Ford Performance Upgrade Kit for 2015 Focus ST Boosts Output to 275 Horsepower, 296 Lb.-Ft. Torque • Ford Performance mountune Focus ST kit for 2015 optimizes performance without sacrificing reliability • Sold through Ford Performance Parts, the kit maintains the base car's factory-backed three-year/36,000-mile warranty • Package adds 23 horsepower and 26 lb.-ft. of torque DEARBORN, Mich., Aug. 18, 2015 – Focus ST customers can get more performance out of their vehicle thanks to a new kit from Ford. And on that front, the new Focus ST mountune upgrade kit delivers in spades. The idea of a street-legal, reliable, largely stock 2.0-liter four-cylinder engine making nearly 300 lb.-ft. of torque might have seemed ludicrous 10 years ago, but the components of the MP275 Focus ST performance upgrade not only combine to produce up to 296 lb.-ft. of torque with 93-octane fuel, they are designed for maximum reliability as well. "The 2015 Focus ST MP275 upgrade is the latest addition to Ford Performance's vast Focus and Fiesta performance catalog that gives enthusiasts the components they need to take their car to the next level," said Adam Gair, product manager, Ford Performance.