2002 Ford F-150 Xlt Extended Cab Pickup 4-door 5.4l on 2040-cars

Auto blog

Ford Expedition, Lincoln Navigator recalled for fire risk

Owners of some 2021 Ford Expedition and Lincoln Navigator SUVs are being urged to park their vehicles outdoors and away from structures until they can be taken to dealers for repairs. Ford issued a recall covering 39,000 vehicles due to engine fires under their hoods, and it's not certain at this point what's causing the flames to start. According to documents posted on the National Highway Safety Administration's website, "The remedy is still under development." Ford says it has reports of 16 under-hood fires, with 14 of those happening in vehicles owned by car rental companies. The fires can happen even while the engine isn't running. According to Ford, "Some customers have reported a burning smell and smoke from the front passenger engine compartment while driving." The fires seem to be starting "in the rear of the engine compartment near the passenger side of the vehicle." Despite the under-hood fire risk, Ford is not at this time recommending that owners stop driving the vehicles. "We are working around the clock to determine the root cause of this issue and subsequent remedy so that customers can continue to enjoy using their vehicles," Jeffrey Marentic, general manager of Ford passenger vehicles, said in a statement. Ford says the fires appear to be limited to SUVs built from Dec. 1, 2020 to April 30, 2021 and says it has no fire reports from vehicles built before or after those dates. In a separate recall, Ford is also calling in about 310,000 heavy-duty trucks because the driver's air bag may not inflate in a crash. That recall covers certain 2016 F-250, F-350, F-450 and F-550 trucks. According to documents posted by NHTSA, dust can get into the airbag wiring in the steering wheel, which can cut electricity to necessary components. To fix the problem, dealers will replace the steering wheel's wiring. And in a third recall, Ford announced it is bringing in 464 Mustang Mach-E electric SUVs from 2021. A software problem in the electric vehicle can cause unintended acceleration, deceleration or a loss of drive power in all-wheel-drive vehicles. NHTSA documents say that the powertrain control computer may not detect a software error. The problem will be fixed by dealers or by an online software update.

Ford running short of F-150 frames

Like most any automaker, Ford is eager to build as many F-150 pickups as it can sell. And considering that the truck has long stood as the top selling vehicle in the United States, that means building (and selling) a lot of them. Further, Ford reports that its factories are finally fully up to speed and ready to build as many F-150s as dealers can sell. Unfortunately another factor is reportedly preventing the new aluminum-bodied pickup from reaching its potential. According to Automotive News and as we've heard before, the Blue Oval automaker has had trouble getting its hands on as many frames as it needs. Though Ford would not confirm the shortage itself, AN cites union sources in reporting that the Metalsa plant in Kentucky, which produces the new F-150's frame for Ford, has been unable to meet the demand for more such frames. "Whenever you have launches, you have issues that you have to deal with in the supply base," is all Ford CFO Bob Shanks would admit. "We're always working closely with suppliers if there's an issue to sort it out. If that were the case, that's what we'd be doing." The reported supply shortage could be why plans for overtime production are reportedly being canceled at both the plants in Kansas City and Dearborn where the F-150s are assembled, despite reaching or nearing full capacity. The shortage could also help explain why, according to AN, sales of the F-Series in the United States fell nearly 10 percent last month, while the rest of the pickup market rose 17 percent. Related Video:

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.