2001 Ford Svt Lightning 4,600 Miles on 2040-cars

Auto blog

2016 Ford Focus RS may yet be AWD, US sales likely

When it comes to forbidden fruit, few vehicles are spoken of in as hushed a tone as the Ford Focus RS. The turbocharged, five-cylinder hot hatch could only be seen from afar by American customers as it tore up the roads of Europe. And while it's safe to say that Ford's Yankee fans are quite happy to now be on equal footing with drivers in the old country thanks to the Focus ST, we doubt there'd be much protestation over a successor to the RS arriving stateside.
Of course, we've seen images of the new RS undergoing testing, but a new story by Road and Track aims to fill in some very large blanks in our knowledge of that car, thanks to a pair of mysterious insiders at the Ford. Chief among those is this - the RS will almost certainly make its way to the US, albeit in limited quantities. It gets better, though.
Under hood, the new RS is unsurprisingly expected to borrow the 2.3-liter, turbocharged four-cylinder from the 2015 Ford Mustang and 2015 Lincoln MKC. While that twin-scroll turbo produces 310 horsepower in the Mustang and 285 ponies in the MKC, R&T expects the RS to deliver quite a bit more firepower - 325 to 350 hp, with preference going to the higher output due to the limited-edition nature of the RS. This roughly fits with previous reports.

Ring Brothers shows 1965-66 Mustang fastback carbon fiber body

We covered one of Ring Brothers' more extreme SEMA builds yesterday, the De Tomaso Pantera-based ADRNLN, but if that well-executed but over-the-top Italian-American exotic is too much for you, then perhaps this Ring Brothers 1965 Ford Mustang fastback with a carbon-fiber body suits your tastes better.
What the performance-parts manufacturer is showcasing with the Mustang is the carbon-fiber body itself, which is fashioned around the 1965-66 fastback. It can be bought from the company and bonded to the skin and unibody as a do-it-yourself project, or you can take your Mustang to Ring Brothers and have the body installed there. The fenders, doors and quarter panels are two-inches wider than stock, and Ring Brothers offers a custom widebody chassis to those who want the complete package.
The show car looks sharp in person lowered on HRE wheels, and we appreciate the bare front end so we can see the supercharged V8 and front coilover suspension, though the details on those performance upgrades are slim. Also note the custom independent rear suspension setup at the rear.

Crowdsource funding push on to save historic Ford buildings

Detroit has no shortage of old, abandoned buildings, both within the city and in the surrounding communities. Few, though, have the historical significance of the old Ford Highland Park facility. Home to the very first moving assembly line, Highland Park was designed by the legendary Albert Kahn, and was one of the homes of the Model T.
Now, the Woodward Avenue Action Association is attempting to buy both the 40,000-square-foot admin building, which is located off the historic Woodward Avenue, and an 8,000-square-foot garage. The WAAA's goal is to convert the buildings into an automotive heritage center. The Detroit News spoke to the interim director of the WAAA, Deborah Schutt, who commented, "[Metro Detroit has] not been very good at telling our own story. So we've decided, let's pull everything together and tell our story."
The WAAA made an offer of $550,000 to buy the two buildings, and has $400,000 from the Michigan Department of Transportation and another $15,000 from the Michigan Economic Development Corporation. It's trying to raise a further $125,000 through crowd-sourcing, starting a campaign called "Five Dollars A Day," after old Hank Ford's $5-per-day wage for line workers.