For Sale or tr-de by owner no reserve auction.
1967 Ford F 100 SWB
Motor is a 1968 model 460 block standard bore
flat top pistons, and reconditioned rods,new rod bearings,new main bearings, new cam bearings.
New oil pump, new timing chain, new gear set
All new Felpro gaskets, Crank shaft is a 70 model.
Has 1970 model DOVE heads, have been reworked have new valve springs,screw in studs, and guide plates.
New keepers, and retainers, but do not have bronze guides. Springs and all are matched for the Lunati Solid Lift Cam,( Part Number 41606 ) cam specs 310-320 duration .568/.580 lift 247/255@.050
Edelbrock Victor Jr. Intake,
Has Holley 750 vacuum secondary carb. electric choke with a CHM liquid filled fuel pressure gauge. And a throttle return/cable bracket kit.
Mallory Comp 9000 Electronic Distributor. MSD 6AL box.
full length headers. with 3 inch Flow Master mufflers, no exhaust, but used mufflers are in good shape.
FORD C 6 Transmission, fresh rebuild with Transgo kit
comes with TCI Part # 442100 10 inch converter.
polished Ford Racing Valve Covers
(I do have the low hanging power steering bracket, water pump,basically, everything to put the front of the motor together, with the exception of the fan..
I think I have all motor info listed, if you have any questions, just call me, (Andy) @ 270-227-3493
Frame; this frame has been cleaned, pressure washed, primed, and painted with clear coat/ base coat silver.
Has a 2003 model Ford Crown Victoria (police car) Front End, has rack and pinion steering, disc brakes, Front end is all finished, turns with the steering wheel, ready to go!
seen in the photos, but I do have the sway bar for this front end, and will include it in this sale, it has been drilled, and is ready to be put on.
Has all new brake lines in the rear, the rear end is a FORD 9 Inch rear end, with new axle seals, and bearings. 4.11 gear posi track.
Perch mounts have been moved to the bottom of the rear end, and pinion angle has been reset, because the rear end was placed on top of the springs.
Has new rear shocks.
Has brand new 15 x 10 rear wheels with 295 x50 R15's on the rear with 80% tread
Front 15x 4 in wheels with 165 R15's both tires and wheels are front end are brand new!
All cab mount bushings are brand new.
Has new radiator support bushings included, but not put on
Body; Any rusty sheet metal was cut out and replaced, starting with full floor boards, both cab mounts (front) Both cab corners, and lower cab supports.
All body seams in the bed ,stake holes in the bed were welded solid, and fixed, all the body trim holes were welded,
Inside of the bed was not finished, because I had planned to put a wood floor in, there are two patch panels in the floor of the bed, one due to rust, and another due to a hole that was cut for a fuel cell.
I have 100's of hours of labor and body work in this truck, it is slick, not a run of the mill back yard paint job, as the photos show. There is one bad spot on passenger side door close to the window, where I pulled paint off removing tape. ( see photos ) The interior has been painted, dash is silver the rest is black, floor boards and kick panels have not been painted.
The entire underneath of body and bed have all been cleaned, primed, and undercoated.
NOTE: The front fenders are finished as well, but are not on the truck, they are included in this sale, I did not want to put them on the truck (as seen in the photos, they have not been cleaned, they might have a bit od dust and compound on them( See Photos)
Tail gate is primed, and sanded, it is an original 71 model tailgate has been in storage since 1971, was never used, it is like new!
Hood, I have two choices the winner can pick from (will need to call me) both need painted, but I will include whichever hood you choose.
I have a really decent aluminum grille for a 68 model complete, it will be included.
NO BUMPERS
NO CARPET KIT
NO WEATHER STRIPPING (a complete weather stripping kit is 300.00 for this truck)
Have factory bench seat, needs a cover kit
Also have an aluminum 3 core radiator
have new white face gauges (included
New tail light lenses, and gaskets! (Included
Misc new rubber grommets,
I do have all good glass for the truck, some I have two of, all will be included!
I have all the bolts, and pieces for this truck, heater boxes, gauge clusters, door panels, radiator support, many items I have several of, all will be included
Winner will need to bring a truck, and trailer, because there is a truck load of parts that go with it!
I have more than this, but am sure I am forgetting to list some items, I simply do not have time to finish this truck the way I want, I have a small fortune invested in this truck, and hundreds of hours of labor, You would be hard pressed to get the paint work for what I am starting it at! I have many more photos of various parts, ect, I could only list 24 pictures here on ebay. If there is anything you would like to see photos of, that is not pictured here, just give me a call, I'll be glad to email them to you ~ Andy
I am listing this truck on my fathers ebay, he drives a truck, and will not be at home to answer questions submitted through ebay messaging, so you will have to call me for questions only!
ANY QUESTIONS>>YOU MUST CALL< I WILL NOT BE AT THE COMPUTER TO ANSWER QUESTIONS< BUT WILL ANSWER ALL CALLS< ANDY @ 270-227-3493
When the auction ends, I request immediate payment of 500.00 Non REFUNDABLE deposit.
If you have a feedback score of 4 or less, I will cancel your bid unless you call me, sorry, but there are too many kids playing with ebay bidding.
I request cash, or cashiers check only at the time of pickup. for the full remainder of auction total. Call to make pickup arrangements following auction end. Pickup preferred within 7 days of auction end.
This is one hell of a deal for a man who who has a little time to complete this truck.It is nearly 75% complete already! I simply do not have the time. Thanks for taking the time to read all, and for your interest in this truck, Good Luck!
Ford F-100 for Sale
Auto Services in Kentucky
Auto Repair & Service, Automobile Parts & Supplies, Engine Rebuilding & Exchange
Address: 8105 Vine St, Park-Hills
Phone: (513) 821-3407
Auto Repair & Service, Lubricating Oils, Oil Marketers
Address: 1319 Vincennes St, New-Albany
Phone: (800) 729-5266
Automobile Parts & Supplies, Auto Transmission
Address: 30 Oakdale Ave, Grapevine
Phone: (270) 821-5969
New Car Dealers
Address: 6 Swope Autocenter Dr, Mount-Washington
Phone: (502) 499-5010
New Car Dealers
Address: 4299 Winston Ave, Covington
Phone: (859) 655-2825
Auto Repair & Service, Automobile Parts & Supplies, Brake Repair
Address: 11678 New Haven Rd, New-Hope
Phone: (502) 549-6481
Auto blog
Mon, 25 Feb 2013
Owners of Ford Escape, Mercury Mariner, Ford Fusion and Mercury Milan models, listen up. According to a report on Automotive News, the National Highway Traffic Safety Administration has opened an investigation into these four vehicles totaling an estimated 725,000 units. The investigation appears to center around a malfunctioning throttle body on non-hybrid models of the 2005-2012 Escape and 2011-2012 Fusion. With Mercury dying off after the 2011 model year, this probe will also apply to the 2005 through 2011 Mariner and the 2011 Milan. There has been some discussion around the Escape stalling issue for some time now, but this investigation appears to be larger in scope than before.
Though not a recall yet, NHTSA's Office of Defects Investigation (ODI) has received 123 complaints of stalling or surging vehicles, while Ford itself has logged 1,472 complaints. The investigation report, which is posted below, seems to indicate that a faulty circuit board for the throttle body could cause the vehicle to go into limp mode, which, according to NHTSA, could cause complaints of both stalling and surging.
Mon, 07 Apr 2014
It seems that the hard winter in much of the country has been as rough on some Fords as it has on many people. The Blue Oval is recalling roughly 434,000 vehicles in two separate recalls, and one of them partially caused by the salt used to melt the snow on roads.
The first recall covers 385,750 2001-2004 Escape models in the Midwest, Northeast and Canada because a subframe could rust and eventually fail. This is partially due to the road salt used in those areas, and about 349,000 of the affected vehicles are in the US. To remedy the problem, dealers are installing a reinforcement cross brace on the frame to strengthen them. There has been one crash caused by the failure but no injuries. According to The Detroit News, this is not the first rust-related recall for Ford. It estimates the company has repaired over two million vehicles since 2010 for problems on vehicles related to the iron oxide, including the rear wheel wells of the Freestar minivan.
The second recall covers 48,950 2013-2014 Ford Fusion, Escape, C-MAX and Lincoln MKZ models because welds in their seatbacks don't meet National Highway Traffic Safety Administration standards. The fault affects the front seats, and the sub-standard welds joining the setback to the recliner could increase the chance on injury. There have been no reported injuries or accidents caused by the problem, but there are 42,972 affected vehicles in the US and 4,744 in Canada.
Fri, 22 Mar 2013
True story: Last fall, I had the opportunity to spend a week with Ford's new 2013 Shelby GT500 - the Blue Oval's factory Mustang with 662 horsepower and 631 pound-feet of torque. It's an amazing beast, to be sure. I'm not sure if it was Michigan's damp streets strewn with potholes and wet leaves, but at no point did I ever say to myself, "You know, Ford is on to a really good thing here, but what it really needs is about twice the power." And yet, for people in warmer climes with infrastructure in better nick - or for those whose muscle cars live their lives out on the track, there's apparently sufficient demand to warrant just such a beast.
Quick studies will recall that Shelby American launched its 1000 last year to commemorate its 50th anniversary, but it is returning to the New York Auto Show with a fresh version based on the 2013 GT500 I drove. The 2013 Shelby 1000 whips up 1,200 horsepower on pump gas thanks to beefed-up forced induction, engine internals and cooling. Wisely, it also incorporates an adjustable suspension and big brake package to make sure those ponies have the best chance being safely deployed to the ground.
What price the world's most powerful "production" muscle car? $154,995 for starters - donor GT500 not included. What, no convertible variant?