1966 Ford F-100 Pickup Longbed - Sharp on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Ford Mustang Shelby GT350R-C set to storm Watkins Glen

Ford is bringing its latest high-performance Mustang back to the track with the new 2016 GT350R-C, which will debut and race in this weekend's IMSA Continental Tire SportsCar Challenge race at Watkins Glen. The spiritual successor to the Boss 302R that's still taking part in the Continental Tire series today, the first GT350R-C will be campaigned by Multimatic Motorsports. It's had its fully independent suspension completely revised for the track, and it gets everything from new spring rates to new anti-roll bars to a lowered ride height. Like the road-going GT350, a 5.2-liter, flat-plane-crank V8 sits under the hood, although Ford didn't release any specifics on power output. In fact, details are in short supply. We're expecting some sort of sequential racing transmission, wildly enhanced brakes, and a thoroughly race-prepared cabin, although Ford hasn't released any info on that stuff. The Blue Oval also hasn't said anything about the aerodynamic package, but strangely, it looks more or less like what's featured on the standard GT350R. The front fascia and rear wing are pretty much identical, and even the side sills seem roughly similar to the production model. "Like so many Mustangs before it, the Shelby GT350R is a car born to race," Ford's director of global performance, Dave Pericak, said in the attached press release. "We're taking it to the track as the GT350R-C and we're ready to see what it can do against the best competition in the world." Scroll down for the official press release from Ford. And if you're so inclined, you can check out the GT350R-C's debut race this weekend at IMSA.com, with coverage starting at 12:25 P.M. If you prefer normal TV, Fox Sports 1 will get around to re-broadcasting the race on July 5 at 10:00 A.M. Related Video: Ford Performance Shelby GT350R-C to Make IMSA Competition Debut at Watkins Glen • All-new Shelby® GT350R-C embodies Ford innovation through performance as race car makes its competition debut this weekend at Watkins Glen • Shelby GT350R-C to compete in the remainder of the 2015 IMSA Continental Tire SportsCar Challenge with Multimatic Motorsports • Competition version of Shelby GT350R features all-new 5.2-liter flat-plane crankshaft V8 created to extend on-track performance DEARBORN, Mich., June 24, 2015 – There's no mistaking the wicked sound or aggressive looks of the all-new Shelby® GT350R-C that Ford announced today would see its first official track time at Watkins Glen this weekend.

Which car companies are creating new jobs in America?

Since January, automakers have announced investments totaling $9.5 billion in U.S. plants, creating or retaining more than 12,000 jobs. Some of those companies have yet to announce just how many jobs will be created given their investments, with the location of many of those jobs still to be determined. Specifically, the 4,000-job Toyota-Mazda joint venture plant still hasn't announced its location, with numerous states jockeying for it. Hyundai has plans to invest $1 billion but has not announced a jobs number yet. And likewise Ford is investing $1.2 billion in Michigan without specifying a number of jobs. Volvo this week announced plans to add a second line to its factory under construction in South Carolina, spending another $500 million and adding 2,500 jobs to the 2,000 it was already trying to fill. Then Thursday, Daimler announced a $1 billion expansion to its facility in Tuscaloosa, Ala., to produce EV batteries and electric SUVs, a move that will add 600 jobs to its hiring this year. Above, we've created a handy pie chart showing you which companies have announced new jobs and how many there will be. Reporting by Paul Lienert in Detroit News Source: Reuters Plants/Manufacturing BMW Chrysler Ford GM Honda Hyundai Mazda Mercedes-Benz Toyota Volvo jobs