1960 Ford Panel Truck Inline 6 Cylinder Three Speed Manual on 2040-cars

Auto blog

Fiat Panda by M-Sport a one-of-a-kind rally car

English racing and engineering firm M-Sport is probably best known for the Bentley Continental GT3 endurance racer and the Ford Fiesta R5 customer rally car. Since building the first of 294 Fiesta R5 Mk. I cars in 2013, the fleet of pint-sized competitors has won a total of more than 950 races. So when a longstanding M-Sport customer asked the company to do something special with a clapped-out, 1990s-era Fiat Panda that would retain the car's Panda-ness but also make it a stonking rally car, M-Sport decided to combine the Italian with the Anglo-American. The result is the Panda by M-Sport, a widened Panda bodyshell lowered atop a Fiesta R5 chassis and engine. Otherwise known as Panda'monium. Or Pandiesta, if you're tipsy. Just fitting the skinny Fiat over the tube-frame chassis meant widening the Panda's body shell by 14.2 inches; that slick grille is actually made of two Panda grilles to gain the required width. That surgery helps maintain the original Panda's silhouette, but more was needed to slide the Fiesta's wider track underneath. More latitudinal stretch was provided by the box-section wheel arches that, up front, flow into a front bumper that is half snowplow. In the longitudinal direction, the Pandiesta's wheelbase is 12.6 inches longer than that of the stock Panda. The Ford's 1.6-liter EcoBoost four-cylinder lives under the hood. It sends nearly 300 horsepower and 332 pound-feet of torque to four Pirelli P Zeros through a five-speed sequential transmission and two custom differentials. The new rear diffuser and single, central exhaust convey the seriousness of the endeavor. Hand-embossed lettering spells "PANDA 4x4" on the rear hatch in case anyone has questions about this having as much capability as the standard Panda 4x4. The interior is all Fiesta R5 save for the Panda-mimicking instrument panel and the co-driver's footrest. The latter is also inscribed with the word "PANDA." Despite the license plate, there's no question of street legality here, or rather illegality. M-Sport says the Panda'monium is ready to do any special stage on tarmac or gravel. Seems this is also the car that launches a new division for customer creations called MS-SV, which is M-Sport Special Vehicles. You can watch M-Sport owner Malcom Wilson take you on tour of the Panda by M-Sport in the video at top, and check out what the finished product can do on a track here.  Related Video: This content is hosted by a third party.

Where the 2023 GMC Sierra AT4X fits into the hierarchy of off-road trucks

The world of off-road pickups sure seems like it's getting crowded, but the reality is that half-ton trucks were always pretty capable, even with what seemed like fairly basic 4x4 packages. It wasn't until recently that manufacturers really started to carve out different off-road niches for their mainstream pickup offerings. With the introduction of the 2022 GMC Sierra 1500 AT4X (alongside its mechanical twin, the Chevy Silverado ZR2), the crowd has grown even thicker. Even we have trouble keeping up with the increased segmentation of off-road pickup trucks, so we threw together this handy guide to help you understand just where these various packages fit into the broader pickup hierarchy. Let's dive in.  Your basics If we say "Z71" or "FX4" to you, both will probably ring a bell. That's because they've been around a few days short of forever and their respective customers have grown so used to these package codes that OEMs got into the habit of just plastering them on the side of so-equipped truck beds. Anybody who sells a pickup truck offers some sort of basic off-road prep package like this one. Z71 is found on GM vehicles; FX4 is Ford's. Ram just calls it "Off Road Group," but no matter what you call them, they're all pretty similar.  Typical upgrades for this category include some additional ground clearance, a basic all-terrain tire, heavy-duty suspension upgrades and likely either a limited-slip or locking rear differential. These are pretty handy for anything beyond a rutted dirt road. On newer trucks — especially on higher trim levels — you'll probably also get some dedicated off-road drive modes.  Mid-range This is where things start to get interesting. To qualify for this category, a locking rear differential is a must. Most of the names in this segment are well-established too, though some (Nissan Titan Pro-4X, anyone?) may not necessarily be on your radar. The Toyota Tundra TRD Pro checks in here, as does the Ram Rebel, Chevy Silverado Trail Boss and GMC Sierra AT4 (no X!).  Realistically, if there's somewhere you need to go and one of these trucks won't do it, you might want to consider a helicopter. But it's 2021, and our thirst for capability is strong, so of course, there's a way to spend more of your money on this type of thing. Onward! Entry-hardcore Here we are, the home of the new 2022 GMC Sierra AT4X and Chevrolet Silverado ZR2. This is a tiny niche, otherwise occupied only by the Ford F-150 Tremor.

This is what a 3D-printed liquid metal Ford Torino looks like

Artist Ioan Florea has encapsulated a 1971 Ford Torino with 3-D-printed liquid metal transferred onto the car using technology that he developed, and the result is a stunningly shiny, seamless design.
"The surface has the highest coefficient of reflectivity never achieved before," Florea told us in an e-mail, using "nano-materials and nano-pigments that create an internal three-dimensional structure and dictate the polymer how to behave." Sure... We'll leave it to him to make any more 3-D-printed liquid metal-transferred art pieces.
Florea grew up in Romania, and the motivation behind picking the old Ford as his canvas came from his childhood memories of what an American car is - "big and wide and fascinating," he says - and the European name of the car itself, which it shares with an Italian city.