2013 Ford Explorer Ltd 7-pass Htd Leather Rear Cam 19k! Texas Direct Auto on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Autoblog Minute: Ford Ranger may return to US

Is Ford planning to bring back its midsize Ranger pickup to the US? Autoblog's Adam Morath reports on this edition of Autoblog Minute. Show full video transcript text [00:00:00] Is Ford planning to bring back its midsize Ranger pickup to the U.S? I'm Adam Morath, and this is your Autoblog Minute. The Detroit News reports that Ford is planning to build its Ranger Pickup truck at the Michigan Assembly Plant in 2018, citing unnamed sources with knowledge of Ford's plans during its ongoing negotiations with the UAW. Autoblog reached out to Ford for comment. [00:00:30] Quote: "We will move production of the next-generation Ford Focus and C-MAX, which currently are built at Michigan Assembly Plant, beginning in 2018. We actively are pursuing future vehicle alternatives to produce at Michigan Assembly and will discuss this issue with UAW leadership as part of the upcoming negotiations." The 2011 Ranger was the last model-year available in the U.S., though Ford currently sells its redesigned Ranger overseas, including in Europe, the Middle East, Africa and Asia Pacific. [00:01:00] With pickup sales on the rise, and the recent critical success of GM's Chevy Colorado midsize truck, the time may be right to revive the Ranger, but compact and midsize trucks only make up a small percentage of sales in America. Truck fans out there, let us know what you think: Can the Ford Ranger continue to revive the compact and midsize pickup market in the U.S? Or, will full-size work trucks like the F-150 continue to dominate? Sound off in the comments. For Autoblog, I'm Adam Morath. Autoblog Minute is a short-form video news series reporting on all things automotive. Each segment offers a quick and clear picture of what's happening in the automotive industry from the perspective of Autoblog's expert editorial staff, auto executives, and industry professionals.

Detroit automakers keep their masks on to keep the factories running

United Auto Workers members leave the Fiat Chrysler Automobiles Warren Truck Plant in May. Fiat Chrysler along with rivals Ford and General Motors Co., restarted the assembly lines after several weeks of coronavirus lockdown. (AP)   DETROIT — When the coronavirus pandemic slammed the United States in March, the Detroit Three automakers shut their plants and brought their North American vehicle production to an unprecedented cold stop. Now, four months after a slow and sometimes bumpy restart in May, many General Motors, Ford and Fiat Chrysler Automobiles  factories are working at close to full speed, chasing a stronger-than-expected recovery in sales. So far, none of the Detroit Three has had a major COVID-19 outbreak since restarting production, even as the coronavirus is surging in Midwestern and Southern communities outside factory walls. "We have people testing positive, but it's not affecting operations," said Ford global manufacturing chief Gary Johnson. Keeping the pandemic at bay has pushed the automakers and 156,000 U.S. factory employees represented by the United Auto Workers into unfamiliar work routines and extraordinary levels of cooperation among the rival automakers that will have to be sustained for months to come. For automakers, the automakers' COVID response has been as much about instilling new habits as relying on new technology. Workers log their symptoms, or lack of them, into smartphone apps and walk past temperature scanners to get to their work stations. But company and union executives said masks, along with physical distancing, are the key to keeping assembly lines rolling. "The mask is the foundation" of protecting workers on the job, said Johnson. Complaints about masks Autoworkers are accustomed to wearing protective gear such as shatterproof glasses and gloves. Masks that cover the mouth and nose, however, were not standard equipment on auto assembly lines, and were a tough sell at first. "The biggest complaint is wearing a mask," United Auto Workers President Rory Gamble told Reuters. "A lot of our members perform physical tasks. Wearing the mask inhibits breathing." Beyond that, Gamble said, masks and distancing make it harder for workers to have conversations on the job or socialize during breaks. "ThatÂ’s pretty much out the window, and it makes for a longer day," he said. Masks make it harder for co-workers to read each other's expressions — often crucial in the noisy environment of a car plant.