on 2040-cars

Auto blog

UK's Loughborough University improving Ford's 1.0-litre EcoBoost engine

How much does it cost for college students to study zero emissions vehicles? At Loughborough University in the UK, a new Advanced Propulsion Centre (APC) is being built at a cost of a billion pounds ($1.7 billion US). The school has just announce that it will fund a number of grad student positions and is creating a new Chair in Advanced Propulsion Systems, which sounds like a fun job to us. We're weird like that. There will be a total of four professor-type positions in the new Center, including the chair, all focused on teaching students about low-carbon vehicle technologies, specifically electric and hybrid ones. The school is investing 1.5 million pounds ($2.5 million) for the new positions. There is a bigger picture as well, a 26-million pound ($44 million) Advanced Combustion Turbocharged Integrated Variable-valvetrain Engine (ACTIVE) project, which uses funds not only from the school but also from Ford and others. The point of ACTIVE is to study Ford's 1.0-liter EcoBoost engine and "improve further its efficiency and ensure it exceeds 2020 emission regulations." This is already a popular engine for the automaker, and it will need to stay at the bleeding edge of efficiency to remain as important in 2020 as it is today. Loughborough University has been working with automakers on advanced energy technologies for years, for example with Rolls-Royce and fuel cells in 2007 and the Lotus Hotfire engine in 2008. University invests GBP1.5M in advanced propulsion research to advance zero emissions vehicles challenge Loughborough University is investing GBP1.5M over five years in strategic research appointments, inspired by the global challenge to develop the new advanced propulsion technologies required for the move to zero emission vehicles. These appointments reinforce the University's world-class research in low-carbon vehicle technologies, adding new dimensions concerned with electric and hybrid drives. Four appointments will be made, including a Chair in Advanced Propulsion Systems, supported by a number of PhD studentships. The GBP1.5M investment is part of the University's commitment to the recently announced Advanced Propulsion Centre (APC) to support the development of new supply chains for low carbon vehicles. APC is an initiative established by the Automotive Council that will see GBP1 billion of investment from government and industry over the next 10 years.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Weekly Recap: Ford guns for 2016 Le Mans glory with new GT

On the eve of the 24 Hours of Le Mans, Ford confirmed it will return to the French endurance race in 2016 and campaign the new GT racecar 50 years after three GT40s swept the podium at the Circuit de la Sarthe. The factory will back a two-team, four-car effort that will compete in the World Endurance Championship and the Tudor United SportsCar Championship running cars operated by Chip Ganassi Racing with Felix Sabates. The GT racecar will make its track debut in January at the Rolex 24 at Daytona, and the driver lineup will be announced later. "But rest assured, there's quite a line forming out the door," Ganassi said at the announcement. The GT is the modern successor to the iconic GT40, which won Le Mans four straight years from 1966-1969. The racecar is a rolling testbed of Ford's latest technologies, including a powerful twin-turbo EcoBoost V6. The car also makes extensive use of carbon-fiber pieces and advanced aerodynamics. Ford tapped Multimatic Motorsports of Canada and Roush Yates Engines to aid in the development of the GT racer. The road-going version, which was revealed in January at the Detroit Auto Show, is also set to launch next year. It caps Ford's growing performance lineup, and the company has ambitious plans to launch more than 12 new sporty models by 2020, including hot metal like the Focus RS, F-150 Raptor, and Shelby GT350R. The GT embodies Ford's best tech, but news of its return to Le Mans immediately conjured images of the company's fierce rivalry in the 1960s with Ferrari and intense competition with Porsche. "When the GT40 competed at Le Mans in the 1960s, Henry Ford II sought to prove Ford could beat endurance racing's most legendary manufacturers," Ford executive chairman Bill Ford said in a statement. "We are still extremely proud of having won this iconic race four times in a row, and that same spirit that drove the innovation behind the first Ford GT still drives us today." Ford is going back to Le Mans. Somewhere, Hank the Deuce must be smiling. OTHER NEWS & NOTES 2016 BMW 7 Series arrives in the fall BMW revealed the sixth generation of its flagship 7 Series this week, which will start at $81,300 when it launches in the United States this fall. BMW is billing it as the roomiest 7 Series ever, and it measures 206.6 inches in length.