2014 Ford Explorer Xlt on 2040-cars

Auto blog

Ford Focus Electric gets $6,000 price drop, now starts at $29,995

In early 2013, the Nissan Leaf shed a massive $6,500 from its $35,200 base price to offer a new starting price of $28,800. Since then, we have seen numerous other plug-in vehicles get smaller price tags, from the Honda Fit EV (lower lease price) to the Chevrolet Volt (around $5,000 lower) to the Mitsubishi i (a $6,130 drop). Last year, Ford lowered the $39,200 price of the Focus Electric by around $4,000, but that hasn't been enough to get the Ford EV to really compete, saleswise, with other plug-in vehicles on the market. But wait, as they say, there's more. This past weekend, Ford lopped another $6,000 from the price of both the 2014 model year Focus EVs currently on dealer lots as well as the redesigned 2015 models that are now rolling out (they're basically the same car, minus some appearance changes). Ford spokesman Aaron Miller confirmed to AutoblogGreen that the Focus EV will now start at $29,995 and said that reducing the price should make the Blue Oval's only pure EV competitive. "We hope by reducing the price we're giving consumers another reason to consider it," he said. Through the end of September 2014, Ford has sold just 1,534 Focus EVs in the US (the model sold 1,335 in the first nine months of 2013). For comparison's sake, the Nissan Leaf starts at $29,010 and sells around 3,000 units a month in the US. Miller notes that the Focus EV has been selling the best on the West Coast, and is also doing well on the East Coast. After that, he said Atlanta and the Great Lakes area also see decent sales of model's admittedly small pie. We can only assume that offering the EV for under $30,000 will make that pie somewhat bigger.

Ford 3D-printing Mustang out of chocolate and candy for Valentine's Day

Is your beloved in love with the new 2015 Ford Mustang? Do they like chocolate (that's a trick question - everyone likes chocolate)? Are they a bit of a futurist? Then this Hallmark holiday, you need to get them this Ford Mustang, 3D-printed in sweet, delicious chocolate.
Ford is teaming with 3D Systems' Sugar Lab in LA to produce the super-accurate pony car confections in both chocolate and sugar candy varieties. The process kicked off with a CAD rendering of the 2015 Mustang, which was then programmed into the 3D printer. After a bit of work from the machine, a four-inch long, two-inch tall Mustang was the result. Why the tieup with 3D Systems, though?
"We wanted to create something fun to show that while 3D printing made these edible Mustangs, manufacturing-level 3D printing was used in the development of Ford's all-new sports car," said Paul Susalla, Ford's supervisor of 3D printing.

Ford recalls more than 550,000 trucks and SUVs for various safety issues

Ford announced safety recalls for its current F-150 pickup along with several Ford and Lincoln crossovers early Wednesday. The recalls cover more than 550,000 vehicles and address various safety defects, ranging from a fire hazard to potential loss of braking power.  The most far-reaching of the recalls covers approximately 550,000 examples of the 2015-2018 Ford Edge and 2016-2018 Lincoln MKX, which may have been assembled with defective front brake jounce hoses (also commonly referred to as "flex lines"). These hoses run from fixed points on the chassis to the individual front brake calipers. Defective hoses could potentially rupture, allowing brake fluid to leak and resulting in a loss of braking function. Ford will replace the components in question with revised parts.  The next-largest recall is for roughly 3,000 2020 Lincoln Corsair crossovers. The affected models may have been assembled without proper clearance between their rear suspension springs and toe link brackets. The components could potentially make contact, wearing down the protective coating on the rear coil springs, allowing corrosion to occur over time. This corrosion could eventually lead to a failure of the spring. If this happens while the vehicle is being driven, it could result in a sudden change to the vehicle's handling characteristics, and the spring fragments could potentially cause further damage to the car or surrounding traffic.  Ford says owners will be notified that their Corsairs need to be inspected; if there is not adequate clearance between the rear suspension components, Ford's service technicians will remove material from the toe link bracket to allow for operation without contact.  The final (and by far the smallest) recall is for the 2020 F-150. Some units may have left the factory with the incorrect retention nut on the hot lead to the starter motor. Ford says it can cause increased heat generation or electrical arcing, which could potentially result in a fire. Ford says this issue is limited to just a few hundred examples sold in the United States. Dealers will inspect the vehicles and replace the nut if necessary.