2014 Ford Explorer Sport on 2040-cars

Auto blog

Ford Mustang, F-150, Expedition, and Lincoln Navigator recalled

The Basics: Ford will recall 201,900 examples of the 2011-2012 F-150, 2012 Expedition, 2012 Mustang, and 2012 Lincoln Navigator. The affected vehicles have the 6R80 transmission. Of the total, there are 84,000 of them in the United States and 17,900 in Canada. The Problem: The output speed sensor on the vehicle's transmission lead frame can force the gearbox to downshift into first gear. If this happens at high speed, it could cause the rear tires to slide or lock up. Injuries/Deaths: There are no reported injuries, but Ford know of three accidents related to this problem. The Fix: Dealers will update the powertrain control module software to eliminate the problem, and they'll also replace the transmission lead frame. If You Own One: Ford will begin notifying affected customers by mail on May 23. Related Video: FORD MOTOR COMPANY ISSUES THREE SAFETY RECALLS AND TWO SAFETY COMPLIANCE RECALLS IN NORTH AMERICA DEARBORN, Mich., April 27, 2016 – Ford Motor Company is issuing three safety recalls and two safety compliance recalls in North America. Details are as follows: Ford issues safety recall and customer satisfaction program for certain 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles in North America to update powertrain control module software and inspect for certain diagnostic trouble codes Ford is issuing a safety recall for approximately 202,000 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles for a potential issue with the output speed sensor on the vehicle's transmission lead frame. Under certain conditions, the transmission controls could force a temporary downshift into first gear. Depending on the speed of the vehicle at the time of the downshift, the driver could experience an abrupt speed reduction that could cause the rear tires to slide or lock up. This condition could result in loss of vehicle control, increasing the risk of a crash. Ford is aware of three reports of accidents and no injuries related to this condition. Affected vehicles are equipped with a 6R80 transmission and include certain 2011-2012 Ford F-150 vehicles built at Dearborn Truck Plant and Kansas City Assembly Plant, Aug. 19, 2011 through March 9, 2012; 2012 Ford Expedition vehicles built at Kentucky Truck Plant, Aug. 19, 2011 through Dec. 19, 2011; Ford Mustang vehicles built at Flat Rock Assembly Plant, Aug. 19, 2011 through Feb.

Best cars for snow and ice in 2023 and 2024

What's the best car for snow? The real answer is "the one with winter tires." What do we mean by that? You could have the finest, most advanced all-wheel-drive system or four-wheel drive in the world, but if you're running all-seasons (the spork of tires), your fancy four-wheeler won't matter much. The odds are, any vehicle on the road running good winter tires will probably perform adequately in slippery, slushy and/or snowy road conditions. (Here's a more complete explanation of why winter tires are totally worth it). In other words, you don't really need any of the cars on this list. With a set of winter tires, countless others will do the job, and even these will be at their best with proper rubber. You can find a variety of winter tires for your car here at Tire Rack. Keep in mind that you will need a full set of four snow tires for safety and performance, no matter what you're driving. The days of your dad putting just two snows on the family truckster to get it moving in a straight line are long gone. Don't get us wrong, getting a car that performs well in snow and ice is still a worthy criteria for car buyers. According to the U.S. Transportation Department, 70% of Americans live in places that get snow and ice. And much of the country has been blasted with arctic air for much of the new year. So let's look at the cars. First, we're highlighting choices for a variety of buyers and price points. Second, we're not just considering snow; we're considering general wintery conditions people will experience driving to work or school. As such, these are all choices with advanced all-wheel-drive systems, usually with "torque-vectoring" systems that not only automatically shunt power front and back, but side to side between the rear axles. Most have extra ground clearance for getting through deep snow, and we prefer those vehicles with more responsive steering, throttles and transmissions that provide a greater sense of vehicle control in slippery conditions.    Acura RDX Read our Acura RDX Review Acura's Super-Handling All-Wheel Drive system was one of the first to offer torque-vectoring, and besides often being touted for its ability to greatly enhanced dry-road handling, its benefits in the slick stuff can be profound. It's actually surprising that Acura hasn't leaned into this capability further by offering more rugged versions of its vehicles.

Watch as U.S. auto industry springs back to life after lockdown

WARREN, Michigan — The Detroit Three automakers and their suppliers began restarting assembly lines on Monday after a two-month coronavirus lockdown in a slow revival of a sector that employs nearly 1 million people in the United States. On a chilly and damp Monday morning, hundreds of workers at Fiat Chrysler Automobile's (FCA) truck plant in Warren, Michigan, began lining up before 4 a.m. to start the 5 a.m. shift. Signs overhead read: "Let's restart." "I'm a little nervous," said Larry Smith, 53, of New Baltimore, who works on wheel alignment away from the assembly line. "They made all the precautions (and) they've done everything they can to prepare us ... I'm trusting in God." Detroit automakers on Monday said there were no issues with absenteeism as the plants opened. FCA reopened four U.S. assembly plants on Monday, including Warren Truck, on a single shift, as well as four parts plants. The reopening of car plants will be a closely watched test of whether workers across a range of U.S. industries can return to factories in large numbers without a resurgence of infections. General Motors Co, Ford Motor Co and FCA have all been preparing for weeks to reopen their North American factories in a push to restart work in an industry that accounts for about 6% of U.S. economic activity. Investors welcomed the gradual restart, sending GM's shares up more than 9% on Monday. FCA shares rose 7.3%, while Ford's were up 6.7%. Auto companies have redesigned assembly lines and retrained workers in an effort to avoid coronavirus outbreaks that could derail production again. Workers entering factories on Monday were checked by temperature monitors. Face masks or shields are standard protective equipment. Jobs such as installing seat belts that used to require two or more workers to get close together inside a vehicle have been redesigned to keep people a safe distance apart. Plastic screens have been installed along assembly lines to separate workers leaning in to the engine compartments of vehicles. Break areas have been reconfigured to keep workers six feet apart. The Detroit automakers have collaborated with each other and with the United Auto Workers to develop common coronavirus safety practices. Other automakers in the United States are adopting similar safety measures.