2014 Ford Explorer Limited on 2040-cars

Auto blog

Mustang parts under the new Lincoln Aviator mean good things for Ford

NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.

Ford dissects the heart of the 2015 Mustang, its engine range

Happy Mustang Day. Are you tired of hearing about the 2015 Ford Mustang yet? No? Good, here's a bunch of mechanical data on Ford's sixth-gen muscle car, along with cutaways of the GT's 5.0-liter V8 and the new 2.3-liter, EcoBoost four-cylinder shown above. We also have a smattering of info on the Stang's updated transmissions and an exploded-parts-diagram view of its all-new independent rear suspension.
Ford is set to make waves offering the Mustang with a turbo for the firs time since the small-volume SVO of the 1980s. Displacing 2.3 liters, the engine's twin-scroll turbo should help the four-cylinder turn out a projected 305 horsepower and 300 pound-feet of torque, while also returning the best fuel economy in the Mustang's engine lineup. As we said in our Deep Dive, the EcoBoost will be slotted in as a premium engine, above the 3.7-liter V6 but below the 5.0-liter V8.
Speaking of that high-revving eight-cylinder, it's receiving a new cylinder head with high-flow ports. The intake and exhaust valves are larger and the cams have been replaced, among other tweaks. It should rev even higher thanks to a rebalanced crankshaft and forged connecting rods. Ford is still claiming a projected 420 hp and 390 lb-ft, although as many of the changes for the 2015's V8 come from the 2013 Boss 302, we're going to assume there's some sandbagging at work.

BMW V8-powered Ford Model A is the definition of Hot Rod

Today, hotrodding has a pretty staid definition. Take one classic American car, add one classic American V8, sprinkle with tire smoke and you pretty much have every hot rod to roll out of a shop in the last 40 years. Mike Borroughs knows it wasn't always this way. Once upon a time, getting your bucket to go faster meant grabbing whatever parts were lazing about the yard, bolting them together with a bit of ingenuity and laughing your way down the quarter mile. It's in that spirit that Burroughs built his 1928 Ford Model A.
Rather than turn to the tired flathead or the common Chevrolet small block, Burroughs plucked a 4.0-liter V8 from a 1995 BMW 7 Series. With 300 horsepower and 300 pound-feet of torque, the engine has no trouble shuffling the old A around town. He had to build a custom chassis to get everything to cooperate, but the result is a 1,500-pound heathen that looks built to harass dry lake beds. You can check it out in the video below. Be warned, the soundtrack by Hanni el Khatib may not be safe for work - awesomeness of this caliber rarely is.